{"id":2941,"date":"2023-08-22T01:47:51","date_gmt":"2023-08-22T01:47:51","guid":{"rendered":"https:\/\/cyclogearreducer.top\/china-wholesaler-cylindrical-gearbox-cylindrical-gear-reducer-wholesaler\/"},"modified":"2023-08-22T01:47:51","modified_gmt":"2023-08-22T01:47:51","slug":"china-wholesaler-cylindrical-gearbox-cylindrical-gear-reducer-wholesaler","status":"publish","type":"post","link":"https:\/\/cyclogearreducer.top\/et\/china-wholesaler-cylindrical-gearbox-cylindrical-gear-reducer-wholesaler\/","title":{"rendered":"China wholesaler Cylindrical Gearbox Cylindrical Gear Reducer wholesaler"},"content":{"rendered":"
\n
\n

Toote kirjeldus<\/h2>\n

\n

Cylindrical gear reducer (JB\/T8853-2001) and bevel gear reducer (JB\/T9002-1999) is XIHU (WEST LAKE) DIS.ANG the 2 series of hard tooth surface gear products, tooth surface with low carbon alloy steel hardening, grinding, has a large carrying capacity, high transmission efficiency, reliable operation, long service life, etc. Be applicable to the metallurgical, mining, transport, cement, construction, chemical industry, textile, light industry, etc.<\/p>\n

\u00a0<\/p>\n

Working conditions shall meet the following requirements:<\/p>\n

    \n
  • highest input shaft speed is not more than 1500 RPM.<\/li>\n
  • the gear meshing linear speed is not more than 25 m\/s;<\/li>\n
  • working environment temperature was minus 40 ~ 50 \u00baC.When working environment temperature is lower than 0 \u00baC, before the start of lubricating oil must be heated to 0 \u00baC and above. When the working environment temperature is higher than 45 \u00baC, heat insulation and cooling measures must be taken.<\/li>\n<\/ul>\n

    Model: ZSY280
    Ratio: 7.6~67
    Input speed(rpm): 750, 1000, 1500(could be changed according to customer)
    Center distance(mm): 280<\/p>\n

    \u00a0<\/p>\n

    \n

    \n

    \n

    \n

    \n

    \u00a0<\/p>\n

    \n

    \n

    \n<\/div>\n
    \n\n\n\n\n\n\n\n
    Rakendus:<\/th>\nMasinad<\/td>\n<\/tr>\n
    K\u00f5vadus:<\/th>\nK\u00f5venenud hambapind<\/td>\n<\/tr>\n
    Paigaldamine:<\/th>\nHorisontaalne t\u00fc\u00fcp<\/td>\n<\/tr>\n
    K\u00e4igukasti kuju:<\/th>\nSilindriline k\u00e4ik<\/td>\n<\/tr>\n
    Samm:<\/th>\nKolmeastmeline<\/td>\n<\/tr>\n
    T\u00fc\u00fcp:<\/th>\nK\u00e4igukasti reduktor<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
    <\/div>\n\n\n\n
    Kohandamine:<\/th>\n\n
    \n
    \n Saadaval\n <\/div>\n

    |<\/span><\/p>\n

    <\/i>Kohandatud p\u00e4ring<\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

    \"k\u00e4igukast\"<\/p>\n

    Kuidas k\u00e4igukasti reduktorid sisend- ja v\u00e4ljundkiiruste k\u00f5ikumistega toime tulevad?<\/h3>\n

    K\u00e4igukasti reduktorid on konstrueeritud nii, et need suudaksid erinevate \u00fclekandearvude ja konfiguratsioonide abil toime tulla sisend- ja v\u00e4ljundkiiruste k\u00f5ikumistega. See saavutatakse erineva suurusega omavahel \u00fchendatud hammasrataste abil, mis edastavad p\u00f6\u00f6rdemomenti ja reguleerivad p\u00f6\u00f6rlemiskiirust.<\/p>\n

    P\u00f5hiprintsiip h\u00f5lmab kahe v\u00f5i enama erineva hammaste arvuga hammasratta \u00fchendamist. Kui suurem hammasratas (vedav hammasratas) haakub v\u00e4iksema hammasrattaga (vedatava hammasrattaga), v\u00e4heneb veetava hammasratta p\u00f6\u00f6rlemiskiirus, samal ajal kui p\u00f6\u00f6rdemoment suureneb. See kiiruse v\u00e4henemine ja p\u00f6\u00f6rdemomendi suurenemine v\u00f5imaldab reduktoritel t\u00f5husalt kohaneda sisend- ja v\u00e4ljundkiiruste muutustega.<\/p>\n

    \u00dclekandearv on kriitilise t\u00e4htsusega tegur kiiruse ja p\u00f6\u00f6rdemomendi muutuste m\u00e4\u00e4ramisel. See arvutatakse veetava hammasratta hammaste arvu jagamisel vedava hammasratta hammaste arvuga. Suurem \u00fclekandearv toob kaasa suurema kiiruse v\u00e4henemise ja proportsionaalse p\u00f6\u00f6rdemomendi suurenemise.<\/p>\n

    Planetary gear reducers, a common type, use a combination of gears including sun gears, planet gears, and ring gears to achieve differ\"k\u00e4igukast\"<\/p>\n

    Milliseid kaalutlusi tuleb reduktorite sobiva m\u00e4\u00e4rdeaine valimisel arvestada?<\/h3>\n

    Reduktorite jaoks sobiva m\u00e4\u00e4rdeaine valimine on optimaalse j\u00f5udluse, pikaealisuse ja efektiivsuse tagamiseks \u00fclioluline. \u00d5ige m\u00e4\u00e4rdeaine valimisel tuleks arvestada mitmete kaalutlustega:<\/p>\n

    1. Koormus ja p\u00f6\u00f6rdemoment:<\/strong> Reduktori poolt edastatava koormuse ja p\u00f6\u00f6rdemomendi suurus m\u00f5jutab m\u00e4\u00e4rdeaine viskoossuse ja kile tugevuse n\u00f5udeid. Suuremate koormuste korral v\u00f5ib vaja minna suurema viskoossusega m\u00e4\u00e4rdeaineid.<\/p>\n

    2. T\u00f6\u00f6kiirus:<\/strong> K\u00e4igukasti reduktori t\u00f6\u00f6kiirus m\u00f5jutab m\u00e4\u00e4rdeaine v\u00f5imet s\u00e4ilitada hammasrataste pindade vahel \u00fchtlast ja kaitsvat kile.<\/p>\n

    3. Temperatuurivahemik:<\/strong> Arvestage t\u00f6\u00f6keskkonna temperatuurivahemikuga. Sobiva viskoossusindeksiga m\u00e4\u00e4rdeained on olulised j\u00f5udluse s\u00e4ilitamiseks erinevates temperatuuritingimustes.<\/p>\n

    4. Saasteainetega kokkupuude:<\/strong> Kui k\u00e4igukast reduktor puutub kokku tolmu, mustuse, vee v\u00f5i muude saasteainetega, peaks m\u00e4\u00e4rdeaine olema korralikult tihendatud ja saastumiskindla.<\/p>\n

    5. M\u00e4\u00e4rimisintervall:<\/strong> M\u00e4\u00e4rake soovitud hooldusintervall. M\u00f5ned m\u00e4\u00e4rdeained vajavad sagedasemat vahetamist, teised aga pakuvad pikemat t\u00f6\u00f6perioodi.<\/p>\n

    6. \u00dchilduvus materjalidega:<\/strong> Veenduge, et valitud m\u00e4\u00e4rdeaine sobib reduktoris kasutatavate materjalidega, sh hammasrattad, laagrid ja tihendid.<\/p>\n

    7. M\u00fcra ja vibratsioon:<\/strong> M\u00f5nel m\u00e4\u00e4rdeainel on omadused, mis aitavad v\u00e4hendada m\u00fcra ja vibratsiooni, parandades seel\u00e4bi \u00fcldist kasutuskogemust.<\/p>\n

    8. Keskkonnam\u00f5ju:<\/strong> M\u00e4\u00e4rdeainete valimisel arvestage keskkonnaalaste eeskirjade ja j\u00e4tkusuutlikkuse eesm\u00e4rkidega.<\/p>\n

    9. Tootja soovitused:<\/strong> J\u00e4rgige tootja soovitusi ja juhiseid m\u00e4\u00e4rdeaine t\u00fc\u00fcbi, viskoossusklassi ja hooldusintervallide kohta.<\/p>\n

    10. J\u00e4lgimine ja anal\u00fc\u00fcs:<\/strong> Rakendage m\u00e4\u00e4rdeaine seisukorra ja toimivuse hindamiseks aja jooksul m\u00e4\u00e4rdeaine j\u00e4lgimise ja anal\u00fc\u00fcsi programmi.<\/p>\n

    Neid kaalutlusi hoolikalt hinnates ja m\u00e4\u00e4rdeekspertidega konsulteerides saavad t\u00f6\u00f6stusharud valida oma reduktoritele sobivaima m\u00e4\u00e4rdeaine, tagades usaldusv\u00e4\u00e4rse ja t\u00f5husa t\u00f6\u00f6.<\/p>\n

    ent speed reductions and torque enhancements. This design provides versatility in handling variations in speed and torque requirements.<\/p>\n

    In summary, gear reducers handle variations in input and output speed\"k\u00e4igukast\"<\/p>\n

    Milliseid tegureid tuleks \u00f5ige reduktori valimisel arvestada?<\/h3>\n

    Sobiva reduktori valimisel tuleb arvestada mitme olulise teguriga, et tagada teie konkreetse rakenduse optimaalne j\u00f5udlus ja efektiivsus:<\/p>\n

      \n
    • 1. P\u00f6\u00f6rdemomendi ja v\u00f5imsuse n\u00f5uded:<\/strong> M\u00e4\u00e4rake kindlaks, kui palju p\u00f6\u00f6rdemomenti ja v\u00f5imsust teie masin oma t\u00f6\u00f6ks vajab.<\/li>\n
    • 2. Kiiruse suhe:<\/strong> Arvutage vajalik kiiruse v\u00e4hendamine v\u00f5i suurendamine, et see vastaks sisend- ja v\u00e4ljundkiirustele.<\/li>\n
    • 3. K\u00e4igukasti t\u00fc\u00fcp:<\/strong> Valige sobiv hammasratta t\u00fc\u00fcp (spiraal-, kald-, uss-, planetaar- jne) vastavalt oma rakenduse p\u00f6\u00f6rdemomendi, t\u00e4psuse ja efektiivsuse n\u00f5uetele.<\/li>\n
    • 4. Kinnitusv\u00f5imalused:<\/strong> Arvestage olemasoleva ruumi ja oma masinale sobiva kinnituskonfiguratsiooniga.<\/li>\n
    • 5. Keskkonnatingimused:<\/strong> Hinnake tegureid, nagu temperatuur, niiskus, tolm ja s\u00f6\u00f6vitavad elemendid, mis v\u00f5ivad m\u00f5jutada k\u00e4igukasti reduktori j\u00f5udlust.<\/li>\n
    • 6. T\u00f5husus:<\/strong> Hinnake reduktori efektiivsust, et minimeerida v\u00f5imsuskadusid ja parandada s\u00fcsteemi \u00fcldist j\u00f5udlust.<\/li>\n
    • 7. Tagasil\u00f6\u00f6k:<\/strong> Arvestage hammasrataste vahelise vastuv\u00f5etava l\u00f5tku v\u00f5i l\u00f5tkuga, mis v\u00f5ib m\u00f5jutada t\u00e4psust.<\/li>\n
    • 8. Hooldusn\u00f5uded:<\/strong> M\u00e4\u00e4rake kindlaks usaldusv\u00e4\u00e4rse t\u00f6\u00f6 tagamiseks vajalikud hooldusintervallid ja -protseduurid.<\/li>\n
    • 9. M\u00fcra ja vibratsioon:<\/strong> Hinnake m\u00fcra- ja vibratsioonitaset, et tagada nende vastavus teie masinate n\u00f5uetele.<\/li>\n
    • 10. Maksumus:<\/strong> V\u00f5rdle erinevate reduktorite algmaksumust ja pikaajalist v\u00e4\u00e4rtust.<\/li>\n<\/ul>\n

      Neid tegureid hoolikalt hinnates ja reduktorite tootjatega konsulteerides saavad insenerid ja valdkonna spetsialistid teha teadlikke otsuseid, et valida oma konkreetse rakenduse jaoks \u00f5ige reduktor, optimeerides j\u00f5udlust, pikaealisust ja kulut\u00f5husust.<\/p>\n

      s by using specific gear ratios and gear arrangements that enable them to efficiently transmit power and control motion characteristics according to the application’s needs.<\/p>\n

      \"China\"China
      toimetaja CX poolt 22.08.2023<\/p>","protected":false},"excerpt":{"rendered":"

      Product Description Cylindrical gear reducer (JB\/T8853-2001) and bevel gear reducer (JB\/T9002-1999) is XIHU (WEST LAKE) DIS.ANG the 2 series of hard tooth surface gear products, tooth surface with low carbon alloy steel hardening, grinding, has a large carrying capacity, high transmission efficiency, reliable operation, long service life, etc. Be applicable to the metallurgical, mining, transport, […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[4355,1769,52,54,55,56,59,60,61,63,24,70],"class_list":["post-2941","post","type-post","status-publish","format-standard","hentry","category-product-catalog","tag-china-gearbox","tag-cylindrical-gear-reducer","tag-gear","tag-gear-gearbox","tag-gear-reducer","tag-gear-reducer-gearbox","tag-gearbox","tag-gearbox-china","tag-gearbox-gear","tag-gearbox-reducer","tag-reducer","tag-reducer-gearbox"],"_links":{"self":[{"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/posts\/2941","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/comments?post=2941"}],"version-history":[{"count":0,"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/posts\/2941\/revisions"}],"wp:attachment":[{"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/media?parent=2941"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/categories?post=2941"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cyclogearreducer.top\/et\/wp-json\/wp\/v2\/tags?post=2941"}],"curies":[{"name":"t\u00f6\u00f6leht","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}