If you need any details or samples, please get in touch with us and you will have our before long reply. Furthermore, all our generation methods are in compliance with ISO9002 expectations. ensures the steadiness and regularity of the key operate of elements.
very hot offer CNC EPTTd EPT plastic worm EPT
설명:
Nylon PA6 Sheets amp Rods that created the with a hundred% Virgin Uncooked EPT by HangEPT EPT Plastics EPTT (Team) EPTT, has the best performance, these kinds of as: extremely challenging, even at low temperatures, and high hardness in the floor, toughness, mechanical reduced EPT, and abrasion resistance. Merged with these characteristics and excellent insulation, and chemical homes, it has become common-amount resources.
Its broadly employed in a assortment of mechanical buildings and spare parts. Nylon PA6 goods that produced by HangEPT EPT Plastics EPTT (Team) EPTT, has the increased hardness, rigidity, a great resistance to wear and warmth deflection temperature.
긍정적인 측면:
one. Excellent Tensile toughness
2. EPT affect and notching influence energy
3. EPT warmth deflection temperature
4. EPT power and stiffness
5. Great glide and limp house figures
6. Great chemical security towards natural solvents and fuels
seven. Resistant to thermal ageing (relevant temperature in between -fifty degC and one hundred ten degC
eight. Dimension alternation by humidity absorption need to be regarded
애플리케이션:
1. Nylon PA6 EPT that manufactured by HangEPT EPT Plastics EPTT (Team) EPTT is widely substituted for use elements of mechanical tools, or utilised as fast-put on components of equipment alternatively of copper and alloy
2. Shaft sleeve, bearing bush, lining, lining plate, EPT
three. Worm EPT, roller copper XiHu (West EPT) Dis.Hu (West EPT) Dis. rail, piston ring, seal ring, slide block
four. Spheric bowl, impeller, blade, cam, nut, valve plate,
5. EPT, stuffing box, rack, belt pulley, pump rotor, etc.
Major Qualities of Nylon
| House | 제품 번호 | 장치 | MC Nylon (Natural) | Oil Nylon EPTT (Black) | Oil Nylon (Environmentally friendly) | MC901 (EPTT) | MC Nylon MSO2 (LigEPTT black) | |
| EPT Houses | 하나 | 밀도 | g/cm3 | one.fifteen | 1.15 | 1.135 | 1.fifteen | 1.sixteen |
| 2 | Water absorption (23 ordmC in air) | % | 1.8-two. | 1.8-two. | 둘 | 2.3 | 2.four | |
| 3 | Tensile strength | MPa | 89 | 75.three | 70 | 81 | 78개 | |
| 4 | 분할 시 인장 변형률 | % | 29 | 22.7 | 25 | 35 | 스물다섯 | |
| 다섯 | Compressive tension(at 2%nominal strain) | MPa | 51 | 51 | 43 | 47 | 49 | |
| 육 | Charpy effect strength (unnotched) | 킬로줄/m둘 | 휴식 없음 | 휴식 없음 | ge50 | 노 BK | No crack | |
| 일곱 | Charpy impact power (notched) | 킬로줄/m둘 | ge5.7 | ge6.4 | 4 | 3.5 | 3.5 | |
| 여덟 | 인장 탄성 계수 | MPa | 3190 | 3130 | 3000 | 3200 | 3300 | |
| 아홉 | 볼 압입 경도 | N/mm둘 | 164 | 150 | 145 | 백육십 | 백육십 | |
| 열 | 로크웰 경도 | – | 엠88 | M87 | M82 | 엠85 | 엠84 | |
