产品描述
星光驱动摆线齿轮电机 特征
1. 特点：
1. Smooth running,low noise gear tooth needle more engagement.
2. Cycloidal tooth profile provides a high contact ratio to withstand overload shocks
3. Compact size: single ratio available from 1/9 to 1/87, double stage up from 1/99 to 1/7569
4. 适用于动态应用：频繁启停反转工况下，由于惯性低，旋风减速器尤为适用。
5. 降低维护成本：与传统齿轮箱相比，可靠性高、寿命长、维护量少。
6. 内部零件可与其他品牌的零件互换，以确保正常运转。
7. Grease Lubricated & Oil Lubricated Models Available
8. 输出轴旋转方向：单级减速：顺时针旋转；双级减速→逆时针旋转
9. Ambient Conditions: Indoor Installation:10-40 Celsius, Max 85% Humidity, Under 1000m Altitude, Well Ventilated Environment, Free of corrosive, explosive gases, vapors and dust
10.Slow Speed Shaft Direction: Horizontal, Vertical Up & Down, Universal Direction
11.Mounting Style: Foot Mount, Flange Mount & Vertical F-flange Mount,
12. 输入连接：旋风式整体电机，空心输入轴适配器
13. 与从动机械的连接方式：联轴器、齿轮、链轮或皮带
14. Cycloid reducer Capacity Range: 0.37kW ~ 11kW;
2. 技术 范围s
| 类型 | 旧式 | 输出扭矩 | 输出轴直径 |
| SXJ00 | JXJ00 | 98牛·米 | φ30 |
| SXJ01 | JXJ01 | 221牛米 | φ35 |
| SXJ02 | JXJ02 | 448牛·米 | φ45 |
| SXJ03 | JXJ03 | 986牛米 | φ55 |
| SXJ04 | JXJ04 | 1504牛·米 | φ70 |
| SXJ05 | JXJ05 | 3051牛·米 | φ90 |
| SXJ06 | JXJ06 | 5608牛米 | φ100 |
关于我们
ZheJiang CZPT Drive Co.,Ltd,the predecessor was a state-owned mould enterprise, was established in 1965. CZPT specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CZPT and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
我们的团队
质量控制
Quality:Insist on Improvement,Strive for CZPT With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
质量方针：提升电力传输领域的整体水平
Quality View:Continuous Improvement , pursuit of excellence
质量理念：质量创造价值
3. 来料质量控制
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.
4. 过程质量控制
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. 最终质量控制 (FQC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. 出货质量控制 (OQC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
product is a product inspection to determine the qualified products.
7. 认证。
包装
送货
| 应用： | 汽车、机械、农业机械 |
|---|---|
| 功能： | Distribution Power, Speed Reduction |
| 布局： | 旋轮线 |
| 硬度： | 硬化的牙面 |
| 安装： | 横版 |
| 步： | 单步 |
| 定制化： |
可用的
| 定制请求 |
|---|
摆线齿轮原理
摆线齿轮传动是一种利用摆线盘独特形状实现运动传递的机构。其原理涉及两个主要部件之间的相互作用： 输入光盘 以及 输出光盘.
The input disc has lobes with pins, while the output disc has lobes with matching holes. The lobes on both discs are not perfectly circular but are shaped in a cycloi
与摆线齿轮箱设计相关的专利
在摆线齿轮箱的发展历程中，各种设计和应用都申请了多项专利。其中一些值得注意的专利包括：
- 谐波驱动： 拉尔夫·B·希思于1957年申请的“谐波传动”专利（美国专利号2,906,143）是与摆线齿轮系统相关的最著名的专利之一。该专利引入了使用柔性部件的高精度减速齿轮机构的概念。
- 摆线驱动机构： 詹姆斯·瓦特于 18 世纪获得的“摆线驱动机构”专利（英国专利 1812 年）经常被引用为摆线运动和齿轮的早期参考文献之一。
- 行星滚轮传动： 1972 年，CF Kafesjian 和 H. Blumenstock 获得了美国专利 3,671,927，该专利介绍了一种“行星滚轮传动装置”，描述了一种具有行星运动的摆线驱动机构。
- 摆线减速器： 1996 年，理查德·J·皮普扎克 (Richard J. Pieprzak) 获得了“摆线减速器”的专利（美国专利 5,588,583），该专利着重于改进摆线齿轮的设计，以应用于各种领域。
These patents represent a small sample of 
制造摆线齿轮箱所用材料
摆线齿轮箱采用多种材料制造，以确保其耐用性、强度和高效运行。一些常用材料包括：
- 钢： 钢材因其高强度和耐久性而成为热门选择。它能承受重载，并具有优异的耐磨性，因此非常适合工业应用。
- 铝： 铝材因其轻质和耐腐蚀的特性而被选用。它常用于对重量有严格要求的应用领域，例如航空航天和机器人领域。
- 铸铁： 铸铁具有良好的散热性能，并以其高耐磨性和抗冲击性而闻名。它常用于需要高扭矩和高强度的重型应用领域。
- 合金： 可以使用各种合金组合来增强某些特定性能，例如耐腐蚀性、耐热性和强度。
- 塑料和复合材料： 在某些情况下，可以使用塑料或复合材料，尤其是在低噪音、轻质结构和耐腐蚀性至关重要的应用中。
材料的选择取决于多种因素，例如应用所需的扭矩、速度、环境条件和性能特性。每种材料都具有独特的优势，因此可以根据不同的工业需求定制摆线齿轮箱。
the numerous innovations and designs related to cycloidal gear systems that have been patented over the years. Patents play a significant role in protecting and promoting innovation in the field of gearbox technology.
dal profile. As the input disc rotates, the pins on its lobes engage with the holes in the output disc’s lobes.
当输入盘旋转时，销钉沿摆线路径运动，带动输出盘旋转。销钉与孔之间的相互作用实现了平稳连续的运动传递。独特的摆线轮廓确保销钉与孔之间始终至少有一个接触点，从而实现高效的扭矩传递并减少磨损。
摆线齿轮传动装置具有扭矩容量大、结构紧凑、运动精度高等优点。然而，由于其部件形状复杂且啮合连续，摆线齿轮箱的制造和装配可能非常复杂。
编辑：CX 2023-09-01
