解决方案描述
星光驱动摆线齿轮电机 品质
1. 特点：
1. Smooth managing,low sounds equipment tooth needle more engagement.
2. Cycloidal tooth profile gives a high contact ratio to withstand overload shocks
three. Compact size: one ratio offered from 1/9 to 1/87, double stage up from 1/99 to 1/7569
four. Perfect for dynamic apps: regular commence-quit-reversing obligations fits for cyclo speed reducer given that inertia is reduced
five. Lessen servicing expenses: high trustworthiness, long lifestyle, small servicing compared to typical gearboxes
6. Internal components replaceable with other brand names to make sure operating.
7. 提供油脂润滑型和油润滑型两种版本
8. 输出轴旋转方向：一级减速：顺时针旋转；二级减速→逆时针旋转
9. Ambient Circumstances: Indoor Set up:ten-40 Celsius, Max eighty five% Humidity, Under 1000m Altitude, Nicely Ventilated Environment, Free of corrosive, explosive gases, vapors and dust
10.Gradual Speed Shaft Course: Horizontal, Vertical Up & Down, Universal Route
十一、安装方式：底座安装、法兰安装和垂直F型法兰安装
12. Input Connection: Cyclo Integral Motor, Hollow Enter Shaft Adapter
十三、CZPT法配合推力机：联轴器、齿轮、链轮或皮带
fourteen. Cycloid reducer Capability Selection: .37kW ~ 11kW
2. 技术 范围s
| 类型 | 上一排序 | 输出扭矩 | 输出轴直径 |
| SXJ00 | JXJ00 | 98牛·米 | φ30 |
| SXJ01 | JXJ01 | 221牛米 | φ35 |
| SXJ02 | JXJ02 | 448牛·米 | φ45 |
| SXJ03 | JXJ03 | 986牛米 | φ55 |
| SXJ04 | JXJ04 | 1504牛·米 | φ70 |
| SXJ05 | JXJ05 | 3051牛·米 | φ90 |
| SXJ06 | JXJ06 | 5608牛米 | φ100 |
关于我们
ZheJiang Starshine Push Co.,Ltd,the predecessor was a point out-owned army CZPT enterprise, was recognized in 1965. Starshine specializes in the complete electrical power transmission remedy for high-stop equipment production industries based on the goal of “Platform Solution, Software Layout and Expert Support”.
Starshine have a sturdy complex drive with in excess of 350 staff at existing, including in excess of thirty engineering experts, thirty top quality inspectors, covering an location of 80000 sq. meters and types of sophisticated processing devices and testing equipments. We have a great basis for the sector software improvement and provider of high-stop speed reducers & variators proudly owning to the provincial engineering technological innovation study centre,the lab of gear pace reducers, and the foundation of CZPT R&D.
我们的船员
优质手柄
品质至上：坚持改进，追求卓越。随着设备制造业的发展，客户对我们目前产品的质量从未感到满意，相反，我们不断创造质量价值。
质量方针：提升电力传输领域的整体水平
质量观：持续改进，追求卓越
质量理念：质量创造价值
三、来料质量控制
为建立来料质量控制的AQL可接受水平，对物料进行全面检验、抽样和检测。合格产品入库，不合格产品退回，进行检查、返工，返工检验负责人跟踪缺陷，监督供应商采取纠正措施。
防止复发的措施。
4. 过程质量控制
在生产现场进行初检、检验和终检，并根据某些项目的要求进行抽样，判断质量变化趋势。
发现生产过程中的异常现象，并监督生产部门改进、消除异常现象或状态。
5. 最终质量控制 (FQC)
生产部门完成产品后，将站在客户的角度对成品进行质量检验，以确保产品质量。
客户的期望和需求。
6. 出货质量控制 (OQC)
产品抽样检验合格后方可入库，但成品出库后，在正式发货前还要进行一次检查，这称为出货检验。检查内容：确认产品在仓库中的存储和转运状态，同时确认发货。
该项目是对产品进行检验，以确定产品是否合格。
七、认证。
包装
船运
These compact, lightweight, lower backlash inline equipment reducers have been initially designed for encoder purposes. They are also ideal for several other drive systems. Encoder gear reducers have a very lower instant of inertia at the shaft enter and are rated for input speeds up to 3000 rpm. Two frame measurements are available with equipment ratios from 4.96:1 to 3600:1. Our encoder gearbox sync pads are available from inventory.
These compact, lightweight, minimal backlash inline gear reducers were originally developed for encoder apps. They are also suitable for several other drive programs. Encoder equipment reducers have a quite low instant of inertia at the shaft enter and are rated for enter speeds up to 3000 rpm. Two frame dimensions are available with gear ratios from 4.96:1 to 3600:1. Our encoder gearbox sync pads are accessible from inventory.
