Product Description
Product Parameters
Detailed Photos
14 types of speed building ratio:=4-100
Minimum return interval: P0, P1P2
Maximum output torque: 23N. m-650N. m
Extremely high torsional rigidity and excellent performance
The highest load free policy is used in conditions with extremely high bearing capacity
Optimize power transmission and increase efficiency line by 98%
Very quiet during operation
Lifetime lubrication, no push protection
Fully sealed, IP65 protection level
Shortest structure and flexible installation
Small model: 64.90.110.140
Application
Product Description
Precision planetary gear reducer is another name for planetary gear reducer in the industry. Its main transmission structure is planetary gear, sun gear and inner gear ring.
Compared with other gear reducers, precision planetary gear reducers have the characteristics of high rigidity, high precision (single stage can achieve less than 1 point), high transmission efficiency (single stage can achieve 97% – 98%), high torque/volume ratio, lifelong maintenance-free, etc. Most of them are installed on stepper motor and servo motor to reduce speed, improve torque and match inertia.
Company Profile
Certifications
Packaging & Shipping
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Hardness: | Hardened Tooth Surface |
---|---|
Installation: | Vertical Type |
Layout: | Coaxial |
Gear Shape: | Planetary |
Step: | Single-Step |
Type: | Gear Reducer |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
---|
What are the considerations for choosing the appropriate lubrication for gear reducers?
Choosing the appropriate lubrication for gear reducers is crucial for ensuring optimal performance, longevity, and efficiency. Several considerations should be taken into account when selecting the right lubrication:
1. Load and Torque: The magnitude of the load and torque transmitted by the gear reducer affects the lubrication’s viscosity and film strength requirements. Heavier loads may necessitate higher viscosity lubricants.
2. Operating Speed: The speed at which the gear reducer operates impacts the lubrication’s ability to maintain a consistent and protective film between gear surfaces.
3. Temperature Range: Consider the temperature range of the operating environment. Lubricants with suitable viscosity indexes are crucial to maintaining performance under varying temperature conditions.
4. Contaminant Exposure: If the gear reducer is exposed to dust, dirt, water, or other contaminants, the lubrication should have proper sealing properties and resistance to contamination.
5. Lubrication Interval: Determine the desired maintenance interval. Some lubricants require more frequent replacement, while others offer extended operational periods.
6. Compatibility with Materials: Ensure that the chosen lubricant is compatible with the materials used in the gear reducer, including gears, bearings, and seals.
7. Noise and Vibration: Some lubricants have properties that can help reduce noise and dampen vibrations, improving the overall user experience.
8. Environmental Impact: Consider environmental regulations and sustainability goals when selecting lubricants.
9. Manufacturer Recommendations: Follow the manufacturer’s recommendations and guidelines for lubrication type, viscosity grade, and maintenance intervals.
10. Monitoring and Analysis: Implement a lubrication monitoring and analysis program to assess lubricant condition and performance over time.
By carefully evaluating these considerations and consulting with lubrication experts, industries can choose the most suitable lubrication for their gear reducers, ensuring reliable and efficient operation.
How do gear reducers ensure efficient power transmission and motion control?
Gear reducers play a vital role in ensuring efficient power transmission and precise motion control in various industrial applications. They achieve this through the following mechanisms:
- 1. Speed Reduction/Increase: Gear reducers allow you to adjust the speed between the input and output shafts. Speed reduction is essential when the output speed needs to be lower than the input speed, while speed increase is used when the opposite is required.
- 2. Torque Amplification: By altering the gear ratio, gear reducers can amplify torque from the input to the output shaft. This enables machinery to handle higher loads and provide the necessary force for various tasks.
- 3. Gear Train Efficiency: Well-designed gear trains within reducers minimize power losses during transmission. Helical and spur gears, for example, offer high efficiency by distributing load and reducing friction.
- 4. Precision Motion Control: Gear reducers provide precise control over rotational motion. This is crucial in applications where accurate positioning, synchronization, or timing is required, such as in robotics, CNC machines, and conveyor systems.
- 5. Backlash Reduction: Some gear reducers are designed to minimize backlash, which is the play between gear teeth. This reduction in play ensures smoother operation, improved accuracy, and better control.
- 6. Load Distribution: Gear reducers distribute the load evenly among multiple gear teeth, reducing wear and extending the lifespan of the components.
- 7. Shock Absorption: In applications where sudden starts, stops, or changes in direction occur, gear reducers help absorb and dampen shocks, protecting the machinery and ensuring reliable operation.
- 8. Compact Design: Gear reducers provide a compact solution for achieving specific speed and torque requirements, allowing for space-saving integration into machinery.
By combining these principles, gear reducers facilitate the efficient and controlled transfer of power, enabling machinery to perform tasks accurately, reliably, and with the required force, making them essential components in a wide range of industries.
Can you explain the different types of gear reducers available in the market?
There are several types of gear reducers commonly used in industrial applications:
1. Spur Gear Reducers: These reducers have straight teeth and are cost-effective for applications requiring moderate torque and speed reduction. They are efficient but may produce more noise compared to other types.
2. Helical Gear Reducers: Helical gears have angled teeth, which provide smoother and quieter operation compared to spur gears. They offer higher torque capacities and are suitable for heavy-duty applications.
3. Bevel Gear Reducers: Bevel gears have conical shapes and intersect at an angle, allowing them to transmit power between non-parallel shafts. They are commonly used in applications where shafts intersect at 90 degrees.
4. Worm Gear Reducers: Worm gears consist of a worm (screw) and a mating gear (worm wheel). They offer high torque reduction and are used for applications requiring high ratios, although they can be less efficient.
5. Planetary Gear Reducers: These reducers use a system of planetary gears to achieve high torque output in a compact design. They provide excellent torque multiplication and are commonly used in robotics and automation.
6. Cycloidal Gear Reducers: Cycloidal drives use an eccentric cam to achieve speed reduction. They offer high shock load resistance and are suitable for applications with frequent starting and stopping.
7. Harmonic Drive Reducers: Harmonic drives use a flexible spline to achieve high gear reduction ratios. They provide high precision and are commonly used in applications requiring accurate positioning.
8. Hypoid Gear Reducers: Hypoid gears have helical teeth and non-intersecting shafts, making them suitable for applications with space limitations. They offer high torque and efficiency.
Each type of gear reducer has its own advantages and limitations, and the choice depends on factors such as torque requirements, speed ratios, noise levels, space constraints, and application-specific needs.
editor by CX 2024-05-16
China Best Sales S 17-187 Helical Gear Motor Electric Motor Speed Reducer Helical Rack Gear Motor Reducer with Shaft with Great quality
Product Description
Characteristics
1, shaft helical gear box, combined with the international technical requirements, has the very high technology content
2, save space, reliable and durable, bear high overload capability, power up to 250 kw;
3, low energy consumption, superior performance, speed reducer efficiency is as high as 95% above;
4, small vibration, low noise, high energy saving;
5, choose high quality forged steel material, semi steel housing, gear surface after high-frequency heat treatment;
Link code and form
R – foot installation, shaft extension type connection
RF – flange, shaft extension type coupling installation
RX – foot installation, single-stage coupling shaft extension type
RXF – flange, shaft extension type single-stage coupling installation
Application
Low price gearbox prices can modular compose with other reducers and variator, get a large reduce ratio drive and variation. Therefore it is applied to many industrial areas, such as Metallurgical mines, lifting transportation, petrochemical construction, textile, environmental, light electric, plastic machine, parking equipment and so on.
R 17-187 helical gear motor advantages:
1. High quality
2. Suitable price
3. High safety performance
4. High reliability
5. Large bearing
6. Long life
7. Cost-effective
8. Standardization in component structure,
9. Packages are all in modules,
10. Compatibility and high degree of exchange ability for all components.
Packaging & Shipping
Product package: Standard package, Package is wooden case, Or according to required.
Our Services
Warranty Terms:
1.12 Months guarantee will be offered.
2. We will react during 24 hours after received the email required to ensure the recovery of buyer’s production line first.
3. The engineers will provide the trainings for operation, maintenace fix skill to make the workers better understanding
4. Free parts replacement in the warranty period.
Company Information
HangZhou CHINAMFG machinery technology Co., Ltd is an industry transmission solutions manufacuturer and service provider.
We offer 1 stop solution for power transmission products for different factories, such as chemicals, energy, material handling, environmental, extraction, pulp and paper, steel and metal, food and beverage, and construction industries.
We supply: Customised gears, Small gearmotors, Industrial gearboxes, Motors, Brand product sourcing.
Our industrial Gear, Gearbox, gearmotor and motor are sold to more than 30 countries. High quality, good price, in time response and sincere service are our value and promises. We aim at making happy cooperation with our customers, bring them reliable and comfortable service. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Gear Position: | External Gear |
Manufacturing Method: | Rolling Gear |
Toothed Portion Shape: | Bevel Wheel |
Material: | Stainless Steel |
Customization: |
Available
| Customized Request |
---|
Are there any disadvantages or limitations to using gear reducer systems?
While gear reducer systems offer numerous advantages, they also come with certain disadvantages and limitations that should be considered during the selection and implementation process:
1. Size and Weight: Gear reducers can be bulky and heavy, especially for applications requiring high gear ratios. This can impact the overall size and weight of the machinery or equipment, which may be a concern in space-constrained environments.
2. Efficiency Loss: Despite their high efficiency, gear reducers can experience energy losses due to friction between gear teeth and other components. This can lead to a reduction in overall system efficiency, particularly in cases where multiple gear stages are used.
3. Cost: The design, manufacturing, and assembly of gear reducers can involve complex processes and precision machining, which can contribute to higher initial costs compared to other power transmission solutions.
4. Maintenance: Gear reducer systems require regular maintenance, including lubrication, inspection, and potential gear replacement over time. Maintenance activities can lead to downtime and associated costs in industrial settings.
5. Noise and Vibration: Gear reducers can generate noise and vibrations, especially at high speeds or when operating under heavy loads. Additional measures may be needed to mitigate noise and vibration issues.
6. Limited Gear Ratios: While gear reducers offer a wide range of gear ratios, there may be limitations in achieving extremely high or low ratios in certain designs.
7. Temperature Sensitivity: Extreme temperatures can affect the performance of gear reducer systems, particularly if inadequate lubrication or cooling is provided.
8. Shock Loads: While gear reducers are designed to handle shock loads to some extent, severe shock loads or abrupt changes in torque can still lead to potential damage or premature wear.
Despite these limitations, gear reducer systems remain widely used and versatile components in various industries, and their disadvantages can often be mitigated through proper design, selection, and maintenance practices.
What role do gear ratios play in optimizing the performance of gear reducers?
Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.
1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).
2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.
3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.
4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.
When selecting gear ratios for a gear reducer, it’s important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.
How do gear reducers handle variations in input and output speeds?
Gear reducers are designed to handle variations in input and output speeds through the use of different gear ratios and configurations. They achieve this by utilizing intermeshing gears of varying sizes to transmit torque and control rotational speed.
The basic principle involves connecting two or more gears with different numbers of teeth. When a larger gear (driving gear) engages with a smaller gear (driven gear), the rotational speed of the driven gear decreases while the torque increases. This reduction in speed and increase in torque enable gear reducers to efficiently adapt to variations in input and output speeds.
The gear ratio is a critical factor in determining how much the speed and torque change. It is calculated by dividing the number of teeth on the driven gear by the number of teeth on the driving gear. A higher gear ratio results in a greater reduction in speed and a proportionate increase in torque.
Planetary gear reducers, a common type, use a combination of gears including sun gears, planet gears, and ring gears to achieve different speed reductions and torque enhancements. This design provides versatility in handling variations in speed and torque requirements.
In summary, gear reducers handle variations in input and output speeds by using specific gear ratios and gear arrangements that enable them to efficiently transmit power and control motion characteristics according to the application’s needs.
editor by CX 2024-05-08
China factory 200 Ratio Three Phase Medium Gear Electric Motor Reduction Gearbox Gear Reducer with Best Sales
Product Description
3 Phase AC Reducer Motor 1/2hp 220V 380V 400W Gear Precision Foot Mounted Reducer Motor
CV and CH series motor can be designed as Single phase and 3 phases type. And power range is from 0.1KW to 3.7KW. The motor can be mounted with brake, and brake type is No excitation type. Material of gears is advanced special alloy steel and all gears are carburizing hardening. This gear motor has been added with senior lubricants, and no needs to added lubricants again.
Helical gear reducer has the characteristics of strong versatility, good combination, and strong bearing capacity, and has the advantages of easy access to various transmission ratios, high efficiency, small vibration, and high allowable axial and radial loads.
This series of products can not only be used in combination with various reducers and vibrators to meet the requirements, but also has the advantage of localization of related transmission equipment.
Mostly used in metallurgy, sewage treatment,chemical, pharmaceutical and other industries.
Type | CH series three phase or single phase ac motors for industrial use | |
Voltage | 220VAC, 380VAC, 415VAC | |
Power range | Power range is 0.1KW to 3.7KW | |
Output Speed | Speed range is from 7rpm to 500rpm | |
Phase | Single phase and 3phases for choice | |
Gears | Special alloy steel and high precise gears | |
Grease | Good grease and no need add grease during using | |
Cooling | Full closed fan | |
USE | This motor is widely used in packing machine, textil machine |
motor is widely used in mix machine,elevator, conveyor,etc. |
OEM Service | We offer OEM service. |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Layout: | Coaxial |
Gear Shape: | Bevel Gear |
Step: | Three-Step |
Samples: |
US$ 70/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Can gear reducers be customized for specific industrial needs and requirements?
Yes, gear reducers can be customized to meet specific industrial needs and requirements. Manufacturers offer customization options to ensure that gear reducers are tailored to the unique demands of various applications:
1. Gear Ratio Selection: Gear reducers can be designed with specific gear ratios to achieve the desired speed reduction or increase, catering to the specific requirements of the machinery or equipment.
2. Shaft Configurations: Gear reducers can be configured with different shaft sizes, lengths, and orientations to fit seamlessly into existing systems or accommodate specific mounting arrangements.
3. Torque Capacity: Customized gear reducers can be designed to handle higher or lower torque loads based on the application’s operational requirements.
4. Environmental Considerations: Gear reducers can be customized with special coatings, materials, or seals to withstand harsh environments, extreme temperatures, or corrosive conditions.
5. Noise and Vibration Reduction: Custom designs can incorporate features to reduce noise and dampen vibrations, enhancing the overall operation and user experience.
6. Mounting and Connection Options: Manufacturers can adapt gear reducer designs to include specific mounting interfaces or connection methods that align with the equipment’s design.
7. Lubrication and Maintenance: Customized gear reducers can include features for easy maintenance, such as accessible lubrication points or monitoring systems.
8. Integration with Controls: Gear reducers can be customized to integrate seamlessly with control systems, sensors, or automation processes, enhancing system efficiency and performance.
By collaborating with manufacturers and providing detailed specifications, industries can obtain tailor-made gear reducers that address their specific operational needs and contribute to the success of their applications.
What factors should be considered when selecting the right gear reducer?
Choosing the appropriate gear reducer involves considering several crucial factors to ensure optimal performance and efficiency for your specific application:
- 1. Torque and Power Requirements: Determine the amount of torque and power your machinery needs for its operation.
- 2. Speed Ratio: Calculate the required speed reduction or increase to match the input and output speeds.
- 3. Gear Type: Select the appropriate gear type (helical, bevel, worm, planetary, etc.) based on your application’s torque, precision, and efficiency requirements.
- 4. Mounting Options: Consider the available space and the mounting configuration that suits your machinery.
- 5. Environmental Conditions: Evaluate factors such as temperature, humidity, dust, and corrosive elements that may impact the gear reducer’s performance.
- 6. Efficiency: Assess the gear reducer’s efficiency to minimize power losses and improve overall system performance.
- 7. Backlash: Consider the acceptable level of backlash or play between gear teeth, which can affect precision.
- 8. Maintenance Requirements: Determine the maintenance intervals and procedures necessary for reliable operation.
- 9. Noise and Vibration: Evaluate noise and vibration levels to ensure they meet your machinery’s requirements.
- 10. Cost: Compare the initial cost and long-term value of different gear reducer options.
By carefully assessing these factors and consulting with gear reducer manufacturers, engineers and industry professionals can make informed decisions to select the right gear reducer for their specific application, optimizing performance, longevity, and cost-effectiveness.
What are the benefits of using a gear reducer in industrial applications?
Gear reducers offer several benefits that make them indispensable in various industrial applications:
1. Speed Reduction: Gear reducers allow the reduction of high-speed input from motors or engines to lower, more usable output speeds for specific applications, ensuring proper equipment operation and safety.
2. Torque Increase: By leveraging the mechanical advantage of gear ratios, gear reducers can significantly increase torque output, enabling the handling of heavy loads and providing the necessary power for tasks such as lifting, conveying, and processing.
3. Precise Control: Gear reducers enable fine-tuning of rotational speed and torque, providing precise control over machinery and processes, which is crucial in industries like manufacturing, material handling, and robotics.
4. Shock Load Absorption: Gear reducers can absorb and dampen sudden shocks or changes in load, protecting both the machinery and connected components from abrupt forces that could otherwise lead to damage.
5. Versatility: With various gear types (e.g., spur, helical, worm) and designs, gear reducers can be tailored to different applications, including those requiring specific speed ratios, torque ranges, and environmental conditions.
6. Efficient Power Transmission: Gear reducers offer high mechanical efficiency, minimizing energy loss during power transmission, which is especially valuable in energy-conscious industries.
7. Compact Design: Gear reducers provide a compact solution for transmitting power and adjusting speeds, making them suitable for installations with space constraints.
8. Reliability and Longevity: Well-designed and properly maintained gear reducers can offer extended service life, contributing to reduced downtime and maintenance costs.
Overall, gear reducers enhance the performance, efficiency, and reliability of industrial equipment, making them essential components in a wide range of applications across various industries.
editor by CX 2024-05-02
China wholesaler 0.014~335kw T Series Electric Motor Bevel Gear Reducer with Great quality
Product Description
0.014~335kW T Series Electric Motor Bevel Gear Reducer
Product Description
Technical data:
1. Power: 0.37-200 (KW)
2. Output Speed: 11-226RMP,
3. Torque: 400-56000 (N. M)
4. Transmission stage: Three stage
Applications:
The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions
1. We accept sample order.
2. We undertake the problems due to quality.
3. We supply detail answers about technical questions.
4. We are the manufacturer so we could supply the products as soon as possible.
5. At the instance of our dear customer, we can do the customized gear boxes for clients.
Detailed Photos
Commercial information:
1. MOQ: 1 set
2. Packing method: Polywood
3. Delivery lead time: 10-25 days
4. Price terms: FOB, CIF, EXW
5. Payment method: T/T, 30% in advance, 70% balance before delivery
6. Shipping port: HangZhou
7. OEM: We accept customized products as per your special requirement.
8. Xihu (West Lake) Dis.lines for the Selection: Usually we can select 1 machine which is suitable for you with some informations from you, such as ratio/motor speed/mounting dimension/ output torque etc.
9. If the minimum order amount is in excess of $10000, there are preferential
input power | 0.018-96kw |
ratio | 1-3 |
permissable torque | 11-607N.M |
mounting type: | footmounted |
usage: | change direction |
Product Parameters
Models | Input Power | Ratio | Max. Torque | Weight(kg) | Output Shaft Dia.(k6) |
T2 | 0.014KW~1.79KW | 1~2 | 11 | 2 | Φ15 |
T4 | 0.026KW~4.94KW | 1~2 | 31 | 10 | Φ19 |
T6 | 0.037KW~14.9KW | 1~3 | 94 | 21 | Φ25 |
T7 | 0.042KW~22KW | 1~3 | 139 | 32 | Φ32 |
T8 | 0.064KW~45.6KW | 1~3 | 199 | 49 | Φ40 |
T10 | 0.11KW~65.3KW | 1~3 | 288 | 78 | Φ45 |
T12 | 0.188KW~96KW | 1~3 | 607 | 124 | Φ50 |
T16 | 0.40KW~163KW | 1~3 | 1073 | 188 | Φ60 |
T20 | 0.69KW~234KW | 1~3 | 1943 | 297 | Φ72 |
T25 | 1.4KW~335KW | 1~3 | 3677 | 488 | Φ85 |
Ratio: 1:1, 1.5:1, 2:1, 2.5:1, 3:1
Packaging & Shipping
Company Profile
After Sales Service
Pre-sale services | 1. Select equipment model. |
2.Design and manufacture products according to clients’ special requirement. | |
3.Train technical personal for clients | |
Services during selling | 1.Pre-check and accept products ahead of delivery. |
2. Help clients to draft solving plans. | |
After-sale services | 1.Assist clients to prepare for the first construction scheme. |
2. Train the first-line operators. | |
3.Take initiative to eliminate the trouble rapidly. | |
4. Provide technical exchanging. |
FAQ
FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
Welcome to contact us for more detail information and inquiry.
If you have specific parameters and requirement for our gearbox, customization is available. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery, Industry |
---|---|
Function: | Change Drive Direction, Speed Reduction |
Layout: | Right Angle |
Hardness: | Hardened |
Installation: | Vertical Type |
Step: | Single-Step |
Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Can you provide real-world examples of products that use gear reducer technology?
Certainly! Gear reducer technology is widely used in various industries and products to enhance performance and efficiency. Here are some real-world examples:
1. Industrial Machinery: Gear reducers are commonly used in manufacturing machinery, such as conveyor systems, material handling equipment, and assembly lines, where they help control speed and torque for precise operations.
2. Wind Turbines: Wind turbines utilize gear reducers to transform the low rotational speed of the wind turbine rotor into the higher speed needed for electricity generation, optimizing energy conversion.
3. Automotive Transmissions: Automobiles use gear reducers as part of their transmissions to optimize power delivery from the engine to the wheels, allowing the vehicle to operate efficiently at different speeds.
4. Robotics: Robotic systems rely on gear reducers to control the movement and articulation of robot arms, enabling precise and controlled motion for various applications.
5. Printing Presses: Gear reducers are integral to printing presses, ensuring accurate and synchronized movement of printing plates, rollers, and paper feed mechanisms.
6. Conveyor Belts: Conveyor systems in industries like mining, agriculture, and logistics use gear reducers to regulate the movement of materials along the conveyor belts.
7. Packaging Machinery: Gear reducers play a crucial role in packaging machines, controlling the speed and movement of packaging materials, filling mechanisms, and sealing components.
8. Cranes and Hoists: Cranes and hoists rely on gear reducers to lift heavy loads with precision and control, ensuring safe and efficient material handling.
9. Pumps and Compressors: Gear reducers are utilized in pumps and compressors to regulate fluid flow and pressure, optimizing energy usage in fluid transportation systems.
10. Agriculture Equipment: Tractors and other agricultural machinery use gear reducers to adjust the speed and power delivery for different tasks, such as plowing, planting, and harvesting.
These examples demonstrate the diverse applications of gear reducer technology across various industries, showcasing their role in enhancing efficiency, control, and performance in a wide range of products and systems.
How do gear reducers ensure efficient power transmission and motion control?
Gear reducers play a vital role in ensuring efficient power transmission and precise motion control in various industrial applications. They achieve this through the following mechanisms:
- 1. Speed Reduction/Increase: Gear reducers allow you to adjust the speed between the input and output shafts. Speed reduction is essential when the output speed needs to be lower than the input speed, while speed increase is used when the opposite is required.
- 2. Torque Amplification: By altering the gear ratio, gear reducers can amplify torque from the input to the output shaft. This enables machinery to handle higher loads and provide the necessary force for various tasks.
- 3. Gear Train Efficiency: Well-designed gear trains within reducers minimize power losses during transmission. Helical and spur gears, for example, offer high efficiency by distributing load and reducing friction.
- 4. Precision Motion Control: Gear reducers provide precise control over rotational motion. This is crucial in applications where accurate positioning, synchronization, or timing is required, such as in robotics, CNC machines, and conveyor systems.
- 5. Backlash Reduction: Some gear reducers are designed to minimize backlash, which is the play between gear teeth. This reduction in play ensures smoother operation, improved accuracy, and better control.
- 6. Load Distribution: Gear reducers distribute the load evenly among multiple gear teeth, reducing wear and extending the lifespan of the components.
- 7. Shock Absorption: In applications where sudden starts, stops, or changes in direction occur, gear reducers help absorb and dampen shocks, protecting the machinery and ensuring reliable operation.
- 8. Compact Design: Gear reducers provide a compact solution for achieving specific speed and torque requirements, allowing for space-saving integration into machinery.
By combining these principles, gear reducers facilitate the efficient and controlled transfer of power, enabling machinery to perform tasks accurately, reliably, and with the required force, making them essential components in a wide range of industries.
Are there variations in gear reducer designs for specific tasks and applications?
Yes, gear reducer designs vary widely to suit specific tasks and applications across various industries. Manufacturers offer a range of gear reducer types and configurations to accommodate different requirements, including:
- Helical Gear Reducers: These are versatile and provide smooth and efficient torque transmission. They are commonly used in applications requiring high precision and moderate speed reduction, such as conveyors, mixers, and agitators.
- Bevel Gear Reducers: These are ideal for transmitting power between intersecting shafts. They are often used in heavy machinery, printing presses, and automotive applications.
- Worm Gear Reducers: These provide compact solutions and are suitable for applications with higher speed reduction requirements, such as conveyor systems, winches, and elevators.
- Planetary Gear Reducers: These offer high torque density and are used in applications demanding precise control, such as robotics, aerospace, and heavy-duty machinery.
- Parallel Shaft Gear Reducers: Commonly used in industrial machinery, these reducers are designed for high torque and reliability.
- Right-Angle Gear Reducers: These are used when space limitations require a change in shaft direction, commonly found in packaging equipment and conveyors.
Each type of gear reducer has unique features and benefits that make it suitable for specific tasks. Manufacturers often provide customization options to tailor gear reducers to the precise requirements of an application, including gear ratios, mounting options, and input/output configurations.
Therefore, the variation in gear reducer designs allows industries to select the most appropriate type based on factors such as torque, speed, space constraints, precision, and environmental conditions.
editor by CX 2024-04-26
China best New Arrival Latest Design Small Electric Motor Gear Box Helical Worm Gear Speed Reducer with Great quality
Product Description
New Arrival Latest Design small Electric Motor Gear Box Helical Worm Gear Speed Reducer
Components:
1. Housing: Cast Iron
2. Gears: Worm Gears, 1 stage
3. Input Configurations:
CHINAMFG Input Shaft
Motor Flange – IEC B5
4. Output Configurations:
CHINAMFG Output Shaft
Hollow Output Shaft
Features:
1. Different variants, both input and output shafts can be mounted horizontally or vertically
2. Compact structure
3. Direct drive or indirect drive available
4. Output could be CHINAMFG shaft or hollow hole
Models & Variants:
WPA Series – Lower Input Shaft
WPS Series – Upper Input Shaft
WPDA Series – Lower Input Flange
WPDS Series – Upper Input Flange.
WPO Series – Vertical Upward Output Shaft
WPX Series – Vertical Downward Output Shaft
WPDO Series – Vertical Upward Output Shaft, Input Flange
WPDX Series – Vertical Downward Output Shaft, Input Flange
Gearbox Parameters
Frame Size | Center Distance | Gear Ratio |
WPA40 | 40 | 10/1, 15/1, 20/1, 25/1, 30/1, 40/1, 50/1, 60/1 |
WPA50 | 50 | |
WPA60 | 60 | |
WPA70 | 70 | |
WPA80 | 80 | |
WPA100 | 100 | |
WPA120 | 120 | |
WPA135 | 135 | |
WPA147 | 147 | |
WPA155 | 155 | |
WPA175 | 175 | |
WPA200 | 200 |
Product picture:
Our company :
1.More than 35 years experience in R&D and manufacturing, export gear motors & industrial gearboxes.
2. Standardization of the gearbox series
3. Strong design capability for large power & customized gearboxes.
4.High quality gearboxes and proven solutions provider.
5.Strict quality control process, stable quality.
6 Less than 2% of the quality complaints.
7.Modular design, short delivery time.
8.Quick response & professional services.
Customer visiting:
Our Services:
Pre-sale services | 1. Select equipment model. |
2.Design and manufacture products according to clients’ special requirement. | |
3.Train technical personal for clients | |
Services during selling | 1.Pre-check and accept products ahead of delivery. |
2. Help clients to draft solving plans. | |
After-sale services | 1.Assist clients to prepare for the first construction scheme. |
2. Train the first-line operators. | |
3.Take initiative to eliminate the trouble rapidly. | |
4. Provide technical exchanging. |
FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
If you have any demand for our products please feel free to contact me.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery, Agricultural Machinery |
---|---|
Function: | Speed Changing, Speed Reduction |
Layout: | Right Angle |
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Step: | Single-Step |
Customization: |
Available
| Customized Request |
---|
Are there any disadvantages or limitations to using gear reducer systems?
While gear reducer systems offer numerous advantages, they also come with certain disadvantages and limitations that should be considered during the selection and implementation process:
1. Size and Weight: Gear reducers can be bulky and heavy, especially for applications requiring high gear ratios. This can impact the overall size and weight of the machinery or equipment, which may be a concern in space-constrained environments.
2. Efficiency Loss: Despite their high efficiency, gear reducers can experience energy losses due to friction between gear teeth and other components. This can lead to a reduction in overall system efficiency, particularly in cases where multiple gear stages are used.
3. Cost: The design, manufacturing, and assembly of gear reducers can involve complex processes and precision machining, which can contribute to higher initial costs compared to other power transmission solutions.
4. Maintenance: Gear reducer systems require regular maintenance, including lubrication, inspection, and potential gear replacement over time. Maintenance activities can lead to downtime and associated costs in industrial settings.
5. Noise and Vibration: Gear reducers can generate noise and vibrations, especially at high speeds or when operating under heavy loads. Additional measures may be needed to mitigate noise and vibration issues.
6. Limited Gear Ratios: While gear reducers offer a wide range of gear ratios, there may be limitations in achieving extremely high or low ratios in certain designs.
7. Temperature Sensitivity: Extreme temperatures can affect the performance of gear reducer systems, particularly if inadequate lubrication or cooling is provided.
8. Shock Loads: While gear reducers are designed to handle shock loads to some extent, severe shock loads or abrupt changes in torque can still lead to potential damage or premature wear.
Despite these limitations, gear reducer systems remain widely used and versatile components in various industries, and their disadvantages can often be mitigated through proper design, selection, and maintenance practices.
What role do gear ratios play in optimizing the performance of gear reducers?
Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.
1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).
2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.
3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.
4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.
When selecting gear ratios for a gear reducer, it’s important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.
Are there variations in gear reducer designs for specific tasks and applications?
Yes, gear reducer designs vary widely to suit specific tasks and applications across various industries. Manufacturers offer a range of gear reducer types and configurations to accommodate different requirements, including:
- Helical Gear Reducers: These are versatile and provide smooth and efficient torque transmission. They are commonly used in applications requiring high precision and moderate speed reduction, such as conveyors, mixers, and agitators.
- Bevel Gear Reducers: These are ideal for transmitting power between intersecting shafts. They are often used in heavy machinery, printing presses, and automotive applications.
- Worm Gear Reducers: These provide compact solutions and are suitable for applications with higher speed reduction requirements, such as conveyor systems, winches, and elevators.
- Planetary Gear Reducers: These offer high torque density and are used in applications demanding precise control, such as robotics, aerospace, and heavy-duty machinery.
- Parallel Shaft Gear Reducers: Commonly used in industrial machinery, these reducers are designed for high torque and reliability.
- Right-Angle Gear Reducers: These are used when space limitations require a change in shaft direction, commonly found in packaging equipment and conveyors.
Each type of gear reducer has unique features and benefits that make it suitable for specific tasks. Manufacturers often provide customization options to tailor gear reducers to the precise requirements of an application, including gear ratios, mounting options, and input/output configurations.
Therefore, the variation in gear reducer designs allows industries to select the most appropriate type based on factors such as torque, speed, space constraints, precision, and environmental conditions.
editor by CX 2024-04-22
China Standard Hard Tooth 3 Phase Motor Gearbox Horizontal Gear Box Vertical Geared Worm Reducer with AC Electric Motor for Cruser with Best Sales
Product Description
Hard Tooth 3 Phase Motor Gearbox Horizontal Gear Box Vertical Geared Worm Reducer with AC Electric Motor for Cruser
1. The wide and comprehensive range of N series for industrial applications
2. Low-speed shaft design: Cylindrical with key, splined, hollow with shrink disc or splined hollow shaft
3. Rigid and precise nodular cast iron casing
4. Low noise running, high manufacturing quality standard
5. High and reliable performance, load capacity and low-speed shaft bearing
Please click here for more types!
Our Services
With all our activities DNV-ISO 9001, SGS -certified, we stand for top-quality service. Entrusting your gearboxes to the care of our Services.
Help protect your gearbox from wear and grinding, SGR gearbox converts torque reliably and efficiently.
We customize our CHINAMFG planetary gear units, double enveloping worm gearbox, helical gear motor, modular design helical gear unit, worm gearbox, cycloidal gearbox etc to fit your application and meet your needs.
These features enable a reliable and safe service life of over 200 000 operational hours.
Our customers have been placing their trust in CHINAMFG gear units since 1997. More than 500 000 gear units of our gearbox are in use reliably around the world, in many cases under very harsh conditions.
Related Products
For more reducers and mechanical accessories, please click here to view
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Function: | Distribution Power, Speed Changing, Speed Reduction |
Layout: | Wrom |
Hardness: | Hardened Tooth Surface |
Installation: | Worm Reducer |
Step: | Worm Drive |
Can you provide real-world examples of products that use gear reducer technology?
Certainly! Gear reducer technology is widely used in various industries and products to enhance performance and efficiency. Here are some real-world examples:
1. Industrial Machinery: Gear reducers are commonly used in manufacturing machinery, such as conveyor systems, material handling equipment, and assembly lines, where they help control speed and torque for precise operations.
2. Wind Turbines: Wind turbines utilize gear reducers to transform the low rotational speed of the wind turbine rotor into the higher speed needed for electricity generation, optimizing energy conversion.
3. Automotive Transmissions: Automobiles use gear reducers as part of their transmissions to optimize power delivery from the engine to the wheels, allowing the vehicle to operate efficiently at different speeds.
4. Robotics: Robotic systems rely on gear reducers to control the movement and articulation of robot arms, enabling precise and controlled motion for various applications.
5. Printing Presses: Gear reducers are integral to printing presses, ensuring accurate and synchronized movement of printing plates, rollers, and paper feed mechanisms.
6. Conveyor Belts: Conveyor systems in industries like mining, agriculture, and logistics use gear reducers to regulate the movement of materials along the conveyor belts.
7. Packaging Machinery: Gear reducers play a crucial role in packaging machines, controlling the speed and movement of packaging materials, filling mechanisms, and sealing components.
8. Cranes and Hoists: Cranes and hoists rely on gear reducers to lift heavy loads with precision and control, ensuring safe and efficient material handling.
9. Pumps and Compressors: Gear reducers are utilized in pumps and compressors to regulate fluid flow and pressure, optimizing energy usage in fluid transportation systems.
10. Agriculture Equipment: Tractors and other agricultural machinery use gear reducers to adjust the speed and power delivery for different tasks, such as plowing, planting, and harvesting.
These examples demonstrate the diverse applications of gear reducer technology across various industries, showcasing their role in enhancing efficiency, control, and performance in a wide range of products and systems.
Can gear reducers be used for both speed reduction and speed increase?
Yes, gear reducers can be utilized for both speed reduction and speed increase, depending on their design and arrangement. The functionality to either decrease or increase rotational speed is achieved by altering the arrangement of gears within the gearbox.
1. Speed Reduction: In speed reduction applications, a gear reducer is designed with gears of different sizes. The input shaft connects to a larger gear, while the output shaft is connected to a smaller gear. As the input shaft rotates, the larger gear turns the smaller gear, resulting in a decrease in output speed compared to the input speed. This configuration provides higher torque output at a lower speed, making it suitable for applications that require increased force or torque.
2. Speed Increase: For speed increase, the gear arrangement is reversed. The input shaft connects to a smaller gear, while the output shaft is connected to a larger gear. As the input shaft rotates, the smaller gear drives the larger gear, resulting in an increase in output speed compared to the input speed. However, the torque output is lower than that of speed reduction configurations.
By choosing the appropriate gear ratios and arrangement, gear reducers can be customized to meet specific speed and torque requirements for various industrial applications. It’s important to select the right type of gear reducer and configure it correctly to achieve the desired speed reduction or speed increase.
Are there variations in gear reducer designs for specific tasks and applications?
Yes, gear reducer designs vary widely to suit specific tasks and applications across various industries. Manufacturers offer a range of gear reducer types and configurations to accommodate different requirements, including:
- Helical Gear Reducers: These are versatile and provide smooth and efficient torque transmission. They are commonly used in applications requiring high precision and moderate speed reduction, such as conveyors, mixers, and agitators.
- Bevel Gear Reducers: These are ideal for transmitting power between intersecting shafts. They are often used in heavy machinery, printing presses, and automotive applications.
- Worm Gear Reducers: These provide compact solutions and are suitable for applications with higher speed reduction requirements, such as conveyor systems, winches, and elevators.
- Planetary Gear Reducers: These offer high torque density and are used in applications demanding precise control, such as robotics, aerospace, and heavy-duty machinery.
- Parallel Shaft Gear Reducers: Commonly used in industrial machinery, these reducers are designed for high torque and reliability.
- Right-Angle Gear Reducers: These are used when space limitations require a change in shaft direction, commonly found in packaging equipment and conveyors.
Each type of gear reducer has unique features and benefits that make it suitable for specific tasks. Manufacturers often provide customization options to tailor gear reducers to the precise requirements of an application, including gear ratios, mounting options, and input/output configurations.
Therefore, the variation in gear reducer designs allows industries to select the most appropriate type based on factors such as torque, speed, space constraints, precision, and environmental conditions.
editor by CX 2023-10-27
China Professional S Serial Helical Worm Right Angle Worm Reduction Gearbox Motor Worm Geared Speed Reducer Electric Motor with high quality
Product Description
Input power | 250KW |
Output torque | 10-62800N.m |
Output speed | 7-415rpm |
Mounting type | Foot mounted, foot mounted with CHINAMFG shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. |
Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
Mounting Position | M1, M2, M3, M4, M5, M6 |
Type | K37-K157 |
Output shaft dis. | 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
Housing material | HT250 High strength cast iron from R97 107,137,147, 157,167,187 |
Heat treatment technology | carbonitriding and hardening treatment |
Single Stage Efficiency | up to 96% |
Lubricant | VG220 |
Protection Class | IP55, F class |
1. Q: Can you make as per customer drawing?
A: Yes, we offer customized service for customers.
2. Q: Are you a factory or trading company?
A. We are a manufacturer in HangZhou, China.
3. Q: What’s your MOQ?
A: One piece.
4. Q: What’s your production time?
A: 5-7 working days after receiving payment; 1-2 days if urgent.
5. Q: What’s your payment terms?
A: T/T, 30% payment in advance, 70% balance payment should be paid before shipping.
6. Q: What’s your package?
A: carton or wooden box packaging.
7.Hong long is the warranty?
A: 12 months.
Application: | Motor, Motorcycle, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Expansion |
Gear Shape: | Bevel Gear |
Step: | Stepless |
Are there any disadvantages or limitations to using gear reducer systems?
While gear reducer systems offer numerous advantages, they also come with certain disadvantages and limitations that should be considered during the selection and implementation process:
1. Size and Weight: Gear reducers can be bulky and heavy, especially for applications requiring high gear ratios. This can impact the overall size and weight of the machinery or equipment, which may be a concern in space-constrained environments.
2. Efficiency Loss: Despite their high efficiency, gear reducers can experience energy losses due to friction between gear teeth and other components. This can lead to a reduction in overall system efficiency, particularly in cases where multiple gear stages are used.
3. Cost: The design, manufacturing, and assembly of gear reducers can involve complex processes and precision machining, which can contribute to higher initial costs compared to other power transmission solutions.
4. Maintenance: Gear reducer systems require regular maintenance, including lubrication, inspection, and potential gear replacement over time. Maintenance activities can lead to downtime and associated costs in industrial settings.
5. Noise and Vibration: Gear reducers can generate noise and vibrations, especially at high speeds or when operating under heavy loads. Additional measures may be needed to mitigate noise and vibration issues.
6. Limited Gear Ratios: While gear reducers offer a wide range of gear ratios, there may be limitations in achieving extremely high or low ratios in certain designs.
7. Temperature Sensitivity: Extreme temperatures can affect the performance of gear reducer systems, particularly if inadequate lubrication or cooling is provided.
8. Shock Loads: While gear reducers are designed to handle shock loads to some extent, severe shock loads or abrupt changes in torque can still lead to potential damage or premature wear.
Despite these limitations, gear reducer systems remain widely used and versatile components in various industries, and their disadvantages can often be mitigated through proper design, selection, and maintenance practices.
What role do gear ratios play in optimizing the performance of gear reducers?
Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.
1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).
2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.
3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.
4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.
When selecting gear ratios for a gear reducer, it’s important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.
How do gear reducers handle variations in input and output speeds?
Gear reducers are designed to handle variations in input and output speeds through the use of different gear ratios and configurations. They achieve this by utilizing intermeshing gears of varying sizes to transmit torque and control rotational speed.
The basic principle involves connecting two or more gears with different numbers of teeth. When a larger gear (driving gear) engages with a smaller gear (driven gear), the rotational speed of the driven gear decreases while the torque increases. This reduction in speed and increase in torque enable gear reducers to efficiently adapt to variations in input and output speeds.
The gear ratio is a critical factor in determining how much the speed and torque change. It is calculated by dividing the number of teeth on the driven gear by the number of teeth on the driving gear. A higher gear ratio results in a greater reduction in speed and a proportionate increase in torque.
Planetary gear reducers, a common type, use a combination of gears including sun gears, planet gears, and ring gears to achieve different speed reductions and torque enhancements. This design provides versatility in handling variations in speed and torque requirements.
In summary, gear reducers handle variations in input and output speeds by using specific gear ratios and gear arrangements that enable them to efficiently transmit power and control motion characteristics according to the application’s needs.
editor by CX 2023-10-17
in Naberezhnye Tchelny Russian Federation sales price shop near me near me shop factory supplier Electric Motor Speed Reducer K Series Bevel Gear with Hallow Shaft Mouted for Mining Equipment manufacturer best Cost Custom Cheap wholesaler
Because of to our sincerity in offering greatest service to our consumers, comprehension of your demands and overriding sense of accountability toward filling purchasing needs, Much more importantly, we make specific components according to equipped drawings/samples and warmly welcome OEM inquiries. We examine every piece of bearing by ourselves prior to delivery.
Merchandise Description
K collection EPTT EPTT/ EPTT motor EPTT electrical motor with reduction EPTT micro cycloidal EPTT EPTT EPTT box
SLK collection EPTT is one variety of Helical EPTTl sort EPTT , High-stainless forged iron case . ,it is created primarily based on modularization , which provide several big difference kinds of combos ,mounting kinds ,and construction designs .The depth classification of ratio can meet up with different of operating condition .High EPTT efficiency ,Reduced power use, outstanding efficiency . The tough tooth area EPTT use the high good quality alloy metal , the procedure of carburizing and quenching, grinding ,which give it stick to figures : Steady EPTT , minimal sounds and temperature ,higher loading ,EPTT functioning lifestyle. which commonly use for industry tools of metallurgy ,Creating EPTT , Chemical , EPTT , Oil, Transportation , Papermaking , SuXiHu (West Lake) Dis.Hu (West Lake) Dis. creating , engineering EPTTs ,and so on
Specifications:
1) Output speed: .6~1,571r/min
2) Output torque: up to 21700N.m
3) EPTT EPTT: .twelve~200kW
4) Mounted kind: foot-mounted and flange-mounted mounting
Merchandise Identify | SLK Sequence Rigid Tooth helical EPTTl EPTT |
Equipment EPTT | 20CrMnTi |
Circumstance EPTT | EPTT250 |
Shaft EPTT | 20CrMnTi |
Equipment Processing | Grinding finish by HOFLER Grinding EPTTs |
Colour | Tailored |
Sounds Test | 65~70dB |
Effectiveness | 94%~98% (relies upon on the EPTT stage) |
Lubricating oil | Shell Omala artificial oil or EPTTral oil , or equivalent model |
Warmth therapy | tempering, cementiting, quenching,and many others. |
Brand name of bearings | C ampU bearing, ZWZ,LYC, EPTB, SKF,NSK and so on |
Brand of oil seal | NAK or other brand name |
Temp. increase (MAX) | 40 deg |
Temp. increase (Oil)(MAX) | fifty deg |
Vibration | le20 microm |
Firm info
EstabEPTTd in 1985, EPTT EPTT EPTTRY CO., LTD is a substantial and new EPTT EPTTrprise partaking in analysis, deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and manufacture for EPTT amp pace variator, one particular of the director member of EPTT EPTT Association of EPTT EPTT EPTTry.
It covers far more than forty,000 square meters, has more than 400 personnel , 20% of whom are specialists, equipped with more than three hundred sets the most EPTT exact numerical handle equipment, incXiHu (West Lake) Dis.Hu (West Lake) Dis. German HOFLER forming EPTT grinding EPTT to increase top quality.
set up much more than thirty nationwide product sales branches to serve our buyers in time and completely.
Our products also exported to a lot more than thirty international locations principal in Europe, Asia America, and Africa, with substantial popularity.
EPTT manage
EPTT ampDelivery
EPTT Details: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd carton/Pallet/StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd picket scenario
Delivery Details : 15-thirty functioning daEPTTupon payment
Related Solution
EPTT Planetary EPTT | Robotic RV EPTT speed EPTT |
Custom made produced Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPTT | UDL Sequence Variator |
PYZ Series Helical Tooth Shaft Mounted EPTT | 8000 Series Cycloidal EPTT |
SLT Sequence Spiral EPTTl EPTT | SLSWL Collection Worm Screw Jack |
SLP Collection Planetary EPTT | SLH/SLB Series Substantial EPTT EPTT |
NMRV Series Worm EPTT | BKM Sequence Helical-hypoid EPTT |
SLRC Sequence Helical EPTT | SLEPTR Series Shaft Mounted EPTT |
SLXG Collection Shaft Mounted EPTT | X/B Sequence Cycloidal EPTT |
SLR/SEPTT/SLK/SLS Collection Helical EPTT | AC/DC EPTT |
Principal solution checklist: sixteen sequence incXiHu (West Lake) Dis.Hu (West Lake) Dis. SLR/SLS/SLK/SEPTT sequence hard tooth flank EPTT EPTT , SLRC sequence aluminium circumstance helical EPTT EPTTs,SLHSLB series high EPTT speed EPTT, SLP sequence planetary velocity EPTT, X/B series cycloidal EPTT, SLXG series shaft-mounted EPTT box, SLSWL series worm screw jack, SLT sequence helical cone EPTT box, completely far more than 10,000 ratios, a variety of specification make us at the head of domestic EPTT business, widely serve the mechanical EPTT subject of ligEPTT amp weighty market such as: beer amp EPTTrage, mining EPTT, foods EPTT, textile printing, rubber amp plastic substance, petrochemical business, jack-up transportation, pharmacy amp approach hides, environmental safety equipment.
Certificate
FAQ
1.Payment Phrase: TT, L/C
2.Delivery time: about 30 daEPTTfrom EPTT payment.
three.We acknowledge EPT products as for every your EPTT need.
four.XiHu (West Lake) Dis.hu (West Lake) Dis.traces for the Selection:Normally we can choose 1 EPTT which is appropriate for you with some informations from you,these kinds of as ratio/motor pace/mounting dimension/ out torque and so forth.
five.If the least orEPTTamount is in extra of $ten thousand, there are preferential.
Q1: What details must I notify you to affirm the merchandise?
A:Design/Size, EPTT Ratio, Shaft instructions amp OrEPTTquantity.
Q2: What can i do if I do not know which a single EPTT?
A:Dont worry, Ship as considerably data as you can, our staff will support you find the rigEPTT one particular you are looking for.
Q3: What is your merchandise guarantee period of time?
A:We supply 1 year guarantee given that the vessel departure date still left EPTT.
Q4: Are you investing firm or manufacturer ?
A: We are manufacturing facility.
Q5: How EPTT is your shipping and delivery time?
A: EPTTly it is 5-ten daEPTTif the merchandise are in stock. or it is fifteen-20 daEPTTif the merchandise are not in inventory, it is in accordance to amount.
Q6: Do you supply samples ? is it free or additional ?
A: Of course, we could supply the sample for free of charge demand but do not spend the EPTT of freight.
Q7: What is your terms of payment ?
A: Payment lt=1000USD, a hundred% EPTT. Payment gt=1000USD, 30% T/T EPTT ,harmony before shippment.
If you have an additional question, pls feel free of charge to get in touch with us as beneath:
Speak to Us
in Santiago Dominican Republic sales price shop near me near me shop factory supplier 7 Inch Slewing Drive with Special Electric Motor Slewing Gear Worm Gear Slewing Reducer manufacturer best Cost Custom Cheap wholesaler
Provider & Top quality controlWe offer detailed drawings and provide each time needed. With a lot of years’ experience in this line, we will be reliable by our rewards in aggressive value, a single-time supply, prompt response, on-hand engineering support and good right after-sales companies.In addition, all our manufacturing procedures are in compliance with ISO9001 requirements. Fantastic consideration has been paid on environmental safety and power saving.
EPT Drive
The title of EPT Travel is no uniform, it also named: EPT EPT, rotary EPT, rotary EPT axle, rotary EPT vice, slew EPT, slewing EPT, and rotary EPT unit. At present the bulk of this kind of units: The EPT Push.
EPT EPT Generate movement can lessen EPT consumption, because the security role. In addition to the field of use in the day-to-day solar EPT programs are usually utilised for EPT motor vehicle, large-duty flat-panel EPT, container cranes, EPT mounted crane, vehicle crane and aerial autos, cranes, gantry cranes, tiny wind EPT stations, space communications, satellite EPTr, etc. . The EPT Drive in the photo voltaic photovoltaic industry, the EPT configuration DC planetary reduction motor or AC EPTed motors Main configuration of the EPT motor as a EPT-EPTn development EPTry.
EPT EPT Travel worm EPT basic principle of the massive EPT ratio of the deceleration system to transmit motion and EPT amongst the two axes staggered in room. The EPT Travel EPT is normally the scenario of the major elements of the worm and wheel bearings, shell, and the EPT source.
As the core component of turntable bearings, can stand up to the aXiHu (West Lake) Dis.al load, radial load and overturning moment. EPT EPT Travel and rotary goods, when compared with the ease of set up, ease of servicing, Set up space cost savings positive aspects to a better extent.
EPT EPT sub-code method as proven in the desk underneath:
EPT-load EPT Drive | ||||||||||||||||||||||||||
Design | Rated output torque /KN-m | Tilting Minute torque /KN-m | Load /KN | Equipment ratio | Self-locking EPTs | Boundary dimensions (mm) | WeigEPT (KG) | |||||||||||||||||||
Static load score, aXiHu (West Lake) Dis.al | Static load score,radial | Dynamic load ranking, aXiHu (West Lake) Dis.al | Dynamic load ranking,radial | L | L1 | L2 | L3 | H2 | H3 | H4 | PhiD | PhiD1 | PhiD2 | PhiD3 | PhiD4 | PhiD5 | n1-Y | n1-X | H | H1 | ||||||
three quot | .two | .five | 30 | sixteen.six | 9.six | 8.four | sixty two:1 | yes | 346 | 153 | 114 | 80 | fourteen.five | 60.five | one hundred twenty five | 100 | one hundred | 126 | 6-M10 | 6-M10 | a hundred ninety | 109 | twelve | |||
five quot | .3 | .eight | seventy six | 22.six | thirteen.eight | 11.8 | 62:one | sure | 361 | 168 | 128 | 93.seven | 24.six | seven | 38 | 161 | one hundred thirty five | 103.5 | 70 | 50 | one hundred twenty | six-M10 | seven-M10 | 219 | seventy nine | eighteen |
7 quot | 1 | 13.five | 133 | 53 | 32 | 28 | 73:1 | of course | 398 | 182 | 166 | 132.7 | 23.4 | four.3 | forty two.five | 237.five | 203.2 | 163 | 120.6 | 98 | 145 | eight-M12 | ten-M12 | 295 | eighty one | 23 |
9 quot | 7.three | 33.nine | 338 | one hundred thirty five | eighty one | 71 | 61:one | of course | 546 | 314 | 239 | 174.1 | 29 | four.four | 54.5 | 316 | 270 | 222.5 | 175 | 145 | 204 | 16-M16 | fifteen-M16 | 411 | 108 | fifty |
12 quot | 9.2 | 54.3 | 475 | 190 | 114 | 100 | 78:1 | sure | 556 | 324 | 285 | 220 | 27 | four.4 | fifty eight.five | 401.five | 358 | 308.five | 259 | 229 | 289 | 18-M16 | 19-M16 | five hundred | one hundred ten.five | sixty |
14 quot | ten.five | sixty seven.8 | 555 | 222 | 133 | 117 | 85:1 | sure | 547 | 330 | 303 | 238 | 28 | 3.five | 59 | 435.five | 390 | 342.5 | 295 | 265 | 325 | eighteen-M16 | 23-M16 | 530 | 110 | seventy three |
17 quot | fourteen.five | one hundred thirty five.6 | 975 | 390 | 235 | 205 | 102:1 | of course | 555 | 338 | 340 | 275.three | 26 | four.6 | 66 | 522 | 479.four | 425.5 | 365.1 | 324 | 406 | 20-M16 | twenty-M16 | 615 | 126 | a hundred and ten |
21 quot | 20.two | 203 | 1598 | 640 | 385 | 335 | a hundred twenty five:1 | sure | 678 | 461 | 398 | 333 | three.three | four.five | 76 | 616 | 584.2 | 525.5 | 466.seven | 431.eight | 532 | 36-M20 | 35-M20 | 732 | 136.5 | 158 |
twenty five quot | 22.five | 271 | 2360 | 945 | 590 | 470 | one hundred fifty:1 | Indeed | 678 | 461 | 467 | 401.eight | 6.two | four.five | 78.two | 744 | 675 | 620 | 585 | 512 | 628.five | 36-M20 | 35-M20 | 863 | 133.two | 230 |
EPT-load slewing EPT | ||||||||||||||||||||||||||
Design | Rated output torque /KN-m | Tilting Second torque /KN-m | Load /KN | Gear ratio | Self-locking EPTs | Boundary proportions (mm) | WeigEPT (KG) | |||||||||||||||||||
Static load score, aXiHu (West Lake) Dis.al | Static load ranking,radial | Dynamic load ranking, aXiHu (West Lake) Dis.al | Dynamic load ranking,radial | L | L1 | L2 | L3 | H2 | H3 | H4 | PhiD | PhiD1 | PhiD2 | PhiD3 | PhiD4 | PhiD5 | n1-Y | n1-X | H | H1 | ||||||
3 quot | .25 | .five | 30 | 16.six | nine.6 | 8.four | 62:one | yes | 346 | 153 | 114 | 80 | fourteen.five | sixty.five | 125 | a hundred | a hundred | 126 | 6-M10 | 6-M10 | a hundred ninety | 109 | 12 | |||
five quot | .37 | .eight | 76 | 22.six | 13.eight | 11.8 | sixty two:1 | yes | 361 | 168 | 128 | ninety three.seven | 24.six | 7 | 38 | 161 | a hundred thirty five | 103.five | 70 | fifty | a hundred and twenty | six-M10 | 7-M10 | 219 | seventy nine | 18 |
7 quot | one.3 | thirteen.five | 133 | fifty three | 32 | 28 | 73:1 | indeed | 398 | 182 | 166 | 132.seven | 23.4 | four.three | forty two.five | 237.five | 203.two | 163 | one hundred twenty.six | ninety eight | a hundred forty five | 8-M12 | 10-M12 | 295 | eighty one | 23 |
nine quot | nine.two | 33.nine | 338 | a hundred thirty five | 81 | seventy one | sixty one:one | sure | 546 | 314 | 239 | 174.1 | 29 | 4.4 | fifty four.5 | 316 | 270 | 222.5 | one hundred seventy five | a hundred forty five | 204 | sixteen-M16 | fifteen-M16 | 411 | 108 | fifty |
twelve quot | eleven.7 | 54.3 | 475 | one hundred ninety | 114 | 100 | 78:one | of course | 556 | 324 | 285 | 220 | 27 | 4.four | 58.five | 401.five | 358 | 308.five | 259 | 229 | 289 | eighteen-M16 | 19-M16 | 500 | a hundred and ten.five | 60 |
14 quot | 12.7 | sixty seven.eight | 555 | 222 | 133 | 117 | eighty five:1 | indeed | 547 | 330 | 303 | 238 | 28 | 3.5 | 59 | 435.5 | 390 | 342.five | 295 | 265 | 325 | 18-M16 | 23-M16 | 530 | a hundred and ten | seventy three |
17 quot | eighteen.five | one hundred thirty five.6 | 975 | 390 | 235 | 205 | 102:1 | yes | 555 | 338 | 340 | 275.three | 26 | 4.6 | sixty six | 522 | 479.4 | 425.5 | 365.1 | 324 | 406 | 20-M16 | 20-M16 | 615 | 126 | 110 |
21 quot | 29 | 203 | 1598 | 640 | 385 | 335 | a hundred twenty five:1 | indeed | 678 | 461 | 398 | 333 | 3.3 | four.five | 76 | 616 | 584.2 | 525.5 | 466.seven | 431.eight | 532 | 36-M20 | 35-M20 | 732 | 136.five | 158 |
25 quot | 34 | 271 | 2360 | 945 | 590 | 470 | 150:one | yes | 678 | 461 | 467 | 401.8 | six.2 | four.five | 78.two | 744 | 675 | 820 | 585 | 512 | 628.5 | 36-M20 | 35-M20 | 863 | 133.2 | 230 |
EPT Generate Application:
EPT EPT has for a vast range of software: solar system gadget (generally with direct-existing reduction box or alternating-present reduction box), wind generator set, container crane, aerial function carriage, transporter with encounter plate, shared gadget, EPT unit, petroleum system, turning faXiHu (West Lake) Dis.Hu (West Lake) Dis.ties of wheels, excavator gadgets, robotic tools for likely up and down (the EPT EPTs generally are with EPT motor) and so on. And there are a lot of other programs with out listing at duration.
Because slewing EPT is the very best option providing large potential and excellent torque on a very same speed variator.
in Warangal India sales price shop near me near me shop factory supplier K Series Electric Motor Speed Reducer with Output Shaft manufacturer best Cost Custom Cheap wholesaler
With numerous years’ knowledge in these lines, we have been distinguished from other suppliers in China by our positive aspects in aggressive pricing, on-time shipping and delivery, prompt responses, on-hand engineering assist and very good following-revenue services. Complete use has been made of all sorts of innovative tactics and engineering to achieve excelsior producing. Furthermore, all our creation techniques are in compliance with ISO9002 requirements. K (as SEW) Series High Effectiveness Equipment Velocity EPT with EPT or without having EPT
EPT substance | EPT200 substantial-energy cast iron from K37,forty seven,57,67,77,87 |
EPT materials | EPT250 Higher power cast iron from K97,127,157,167,187 |
EPT hardness | HBS90-240 |
Gear substance | 20CrMnTi |
Area hardnesss of EPT | HRC58 deg-sixty two deg |
Gear main hardness | HRC33 deg-40 deg |
Input/Output shaft materials | 40CrMnTi |
Input/Output shaft hardness | HBS241 deg-286 deg |
Shaft at oil seal postion hardness | HRC48 deg -fifty five deg |
Machining precision of EPTs substance | Precise grinding six-5 grade |
Heat therapy | tempering, cementing, quenching etc |
Effectiveness | up to ninety% |
Noise(Max) | sixty-68dB |
Device product | Foot mounted,flange mounted,hollow shaft mounted |
Enter approach | flange enter,inline enter,shaft enter |
Vibration | le 20um |
Backlash | le 20Arcmin |
EPT manufacturers | NSK,C ampU and so on |
Oil seal brand names | NAK,SKF etc |
Lubricant | VG220 |
EPT | IP55, F class |
EPT shaft | 40Cr, Tempering, cementing,quenching and so on. |
1.Our Solutions
1.1.We offer twelve months Guarantee.
1.2. We have thousands of EPT EPTs. From Input EPT .06KW to 200KW, Ratio 1.3-289.seventy four, Output speed -1095rpm and Output torque 1.4-62800Nm. They can meet up with your all different specifications for different EPT.
one.3. We supply E-catalog or Paper catalog,so you can choose the model effortlessly according to your needs
one.4.You are welcome to pay a visit to our manufacturing facility to examine our merchandise,we can help you to book the lodge or ticket
2.Company Details
2.1.Our Firm:
The Predecessor for ZheJiang EPT Drive CO.,Ltd (originally called HangEPT XiHu (West Lake) Dis.ngguang EPT EPTry CO.,Ltd) Condition-owned army mould EPTrpriese which estabEPTd in 1965.
EPT is positioned in HangEPT,EPT and the factory covers an area of about 25000 square meters.
Generation Ability:much more than 50 percent a million sets of pace EPT per year.
2.two.Our People:
The organization has a robust specialized drive. It has a lot more than four hundred staff at existing, incXiHu (West Lake) Dis.Hu (West Lake) Dis. far more than forty engineering specialists and ten specialists and senior engineers enEPTing EPT allowances of the Condition Council.
2.three. Our Certificates:
Passed quot ISO 9001 Global EPT Method Certificate quot, quotInternational EPT Credit history AAA Ceritifacte quot , quot Swiss SGS Certificate quot, Iconic Brand in EPT EPT Industry quot, quotFamous Model of ZheJiang Province quot, quotNon-public Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational Substantial and EPT-tech EPTrprise quot, quotTOP fifty in EPT Equipment Sector quot quot2011 HangEPT Engineering and Technological R ampD CEPTr quot and so on.
3. FAQ
Q:Are you a investing company or maker?
A: HangEPT EPT Drive Co., Ltd formerly was a Condition-owned XiHu (West Lake) Dis.ngguang Mold Factory, a point out-owned army EPT EPTrprise estabEPTd in 1965. It completed reform in 2002. Considering that reform, EPT has deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed rapidly. It took the lead in passing ISO9001 International EPT Program Certificate and International EPT Credit score AAA Certification in 2004, and Swiss SGS Certificate in 2009. It has gained this kind of titles as quotIconic Model in EPT EPT Business quot, quotFamous Manufacturer of ZheJiang Province quot, quotNon-community Scientific and Technological EPTrprise in ZheJiang Province quot, quotNational Higher and EPT-tech EPTrprise quot, and quotTope 50 in EPT Gear Sector quot successively
Q:Exactly where do you foundation?
A: We are in HangEPT,ZheJiang ,EPT. We have two factories,EPT manufacturing unit is in XiHu (West Lake) Dis.hu (West Lake) Dis. district,HangEPT,EPT and the outdated a single is in CHangEPT District,HangEPT,EPT.
Q:What kinds of EPT can you produce for us?
A:Principal items of our company: JWB-X series mechanical constantly variable EPT, RV series worm EPT EPT, B/JXJ cycloidal pin EPT velocity EPT, NCJ sequence EPT EPT, and R, F K, S series helical-tooth EPT (SEW), a lot more than one particular hundred designs and hundreds of requirements.
Q:What are the software of the EPT?
A:EPT are commonly employed in ceramic, EPT, foodstuff, metallurgy, beer amp drink, printing and dyeing, textile, petrochemical engineering, warehouse EPT, wood-operating EPT, environmental protection gear, printing and EPT, pharmacy, and leather-based. EPT are marketed in some nations and regions, such as Europe, America, and SouthEPT Asia, and it possesses dozens of distributors and following-sale provider brokers.
Q:What is the material you use?
A1: EPT EPT body ( For the RV collection worm EPT Size thirty~ninety)
A2: Cast iron(For the RV series worm EPT, Measurement 110-one hundred fifty, For the NCJ amp F/R/S/K collection helical EPT EPT)
Our manufacturing unit (ZheJiang EPT Push Co., Ltd.) is a large and famous 6S stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT manufacturing unit with around 380 workers given that 1965 . We export to South Asia, SouthEPT Asia, Africa, Middle EPT, South The us, North America, Europe…and so forth. We offer EPT to SIEMENS,ABB,SACMI,BUHLER,MODENA,EPT…and many others. Sincerely hope to build a win-acquire company romantic relationship with you.
Anticipating to talk about a lot more details with you !
Ideal Wishes
Jacky
Manufacturing unit: ZheJiang EPT Drive Co., Ltd. (Preceding name: HangEPT XiHu (West Lake) Dis.ngEPTg EPT EPTry)
Insert: No.ten,HuiEPT EPT Park, EPTi Town, XiHu (West Lake) Dis.hu (West Lake) Dis. District, HangEPT Town, ZheJiang Province, EPT.
Tel : 1357175253
Net: www.xgcd.cn