In this way, our goods have continued to acquire market place acceptance and clients gratification in excess of the past handful of several years. We offer you OEM support. Much more importantly, we make specific parts according to equipped drawings/samples and warmly welcome OEM inquiries. 6W GU Variety 90 Collection Of Brushless DC Gear EPT
Simple Attributes Of EPT
#822660W (DC EPT EPT When Used To 24VDC/36VDC/48VDC)
|
Rated EPT (Ongoing) |
V |
a hundred and twenty (60W/90W/120W) |
|||
|
Rated velocity |
omdr./min. |
2500 |
|||
|
Nominelt drejningsmoment |
Nm |
.458 |
|||
|
Instantaneous maXiHu (West Lake) Dis.mum torque |
Nm |
.687 |
|||
|
Rotor second of inertia |
J:X10-4kg.mto |
.250 |
|||
|
Speed control selection |
Omdrejninger i minuttet |
High strain two hundred-2500RPM (Lower stress 200-3000RPM) |
|||
|
Speed management range |
On load |
Under plusmn 1 %: issue ~rated torque, rated velocity, rated voltage, place temperature |
|||
|
On voltage |
Under plusmn1%: condition rated voltage plusmn10%, rated pace, rated load, area temperature |
||||
|
On temperature |
elow plusmn1%: Circumstances of ambient temperature ~ 40 degC rated voltage, rated load and rated speed |
||||
|
EPT enter |
Rated voltage |
V |
One period 110V |
One phase 220V | 24VDC(Optiond 36VDC/48VDC) |
|
Voltage tolerance selection |
plusmn10% |
||||
|
Frekvens |
Hz |
50/sixty |
/ |
||
|
Frequency tolerance selection |
plusmn5% |
/ |
|||
|
Rated input recent |
EN |
tre, fem |
to. |
six.eight |
|
|
Instantaneous maXiHu (West Lake) Dis.mum enter recent |
EN |
7. |
4.fem |
13. |
|
Produktbeskrivelse
Circular Shaft Type Optical EPT
#8226Z5BLD60-5GU-25S(5GU30RC)-Voltage 24/36/forty eight/one hundred ten/220
#8226Z5BLD60-5GU-25S(5GU30RC) Diagram (ZD StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Drive)
#8226Reduced Voltage Wrie Plughole Corresp-onding EPTal Rationalization
|
plughole |
1 |
to |
tre |
4 |
|
sign |
U |
V |
Hv |
Hu |
|
plughole |
fem |
6 |
7 |
otte |
|
signal |
V |
GND |
Hw |
Vcc |
#8226Substantial Voltage Wrie Plughole Corresp-onding EPTal Rationalization
| Corresponding indicating | |||||||||
|
en |
2 |
tre |
fire |
fem |
seks |
syv |
otte |
ni |
10 |
|
Blue (coarse) |
Yellow (good) |
Yellow (coarse) |
Inexperienced (wonderful) |
Environmentally friendly (coarse) |
Blue (good) |
EPT mesh |
Red (fantastic) |
Black (wonderful) |
|
|
V |
Hu |
U |
Hv |
V |
Hw |
Vcc 5V |
GND |
||
#8226PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel Shaft Speed EPT
Z5BLD60-5GU-25S(5GU30RC)-Voltage 24/36/forty eight/110/220 ()-Velocity Ratio Benefit
one.Connector:5557-8R/10R(MOLEX) 2.The sheath duration of guide line 300mm three.Round terminal:SRA-21T-four
#8226Decimal Gearhead
5GN()XK-Velocity Ratio Worth, EPTly 10
|
Gearhead Model |
Gearforhold |
L Dimension |
|
5GU()K |
tre-to hundrede |
65.five |
#8226EPTr the EPT ratio in the box () in the model identify
#8226Z5BLD60-5GU-25S(5GU30RC) EPT Allowable Torque (Device: N.m)
|
Design |
EPTSpeed/Reduction Ratio |
tre |
3.six |
5 |
seks |
syv, fem |
ni |
10 |
tolv.fem |
15 |
atten |
20 |
25 |
tredive |
36 |
halvtreds |
tres |
halvfjerds fem |
90 |
100 |
et hundrede og tyve |
150 |
180 |
200 |
|
200-1500RPM |
1.forty five |
one.seventy four |
two.41 |
2.90 |
3.sixty two |
4.34 |
4.35 |
five.forty four |
6.53 |
seven.83 |
seven.87 |
nine.83 |
eleven.eight |
14.2 |
19.7 |
20. |
twenty. |
twenty. |
20. |
twenty. |
20. |
twenty. |
twenty. |
|
|
Z5BLD60-()GU |
2000RPM |
1.39 |
1.67 |
two.32 |
2.78 |
three.forty eight |
four.18 |
four.18 |
5.23 |
six.27 |
seven.fifty three |
seven.56 |
nine.forty five |
11.3 |
thirteen.6 |
eighteen.9 |
twenty. |
20. |
twenty. |
20. |
twenty. |
20. |
twenty. |
20. |
|
2500RPM |
en.elleve |
1.34 |
1.86 |
2.23 |
2.seventy eight |
3.34 |
three.35 |
4.18 |
five.02 |
6.02 |
6.05 |
7.56 |
nine.08 |
10.nine |
15.1 |
eighteen.two |
20. |
twenty. |
20. |
20. |
twenty. |
20. |
20. |
Be aware :The() (grey) in the desk implies that the rotation course is constant with the motor.(The torque unEPTdifferent velocity and speed ratio is obtained unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
#8226L Kind Pace EPT
#8226Z5BLD60-5GU-25S(5GU30RC) EPT Allowable Torque (Device: N.m)
|
EPTSpeed/Reduction Ratio |
5 |
ti |
femten |
20 |
30 |
50 |
100 |
200 |
|
200~1500RPM |
2.41 |
4.83 |
7.24 |
9.65 |
13.1 |
21.8 |
forty three.five |
sixty eight. |
|
2000RPM |
two.04 |
4.08 |
6.13 |
8.17 |
11. |
eighteen.four |
36.8 |
66.6 |
|
2500RPM |
one.67 |
3.35 |
5.02 |
six.69 |
ti. |
16.7 |
33.5 |
sixty.5 |
#8226Arc Cone RigEPT Angle Speed EPT EPT
Z5BLD60-5GU-25S(5GU30RC)-Voltage 24/36/forty eight/a hundred and ten/220 ()-Velocity Ratio Worth
Z5BLD60-5GU-25S(5GU30RC)-Voltage 24/36/48/110/220 ()-Velocity Ratio Price
one.The sheath size of guide line 300mm two.Connector: 5557-8R/10R (MOLEX) 3.Spherical terminal: SRA-21T-4 (Lower floor)
#8226 Z5BLD60-5GU-25S(5GU30RC) EPT Allowable Torque (Device: N.m)
|
Produkt |
EPTSpeed/Reduction Ratio |
syv, fem |
ni |
ti |
12.fem |
femten |
atten |
20 |
femogtyve |
30 |
36 |
50 |
60 |
halvfjerds fem |
90 |
hundrede |
120 |
150 |
hundrede og firs |
|
two hundred ~1500RPM |
three.sixty two |
4.34 |
four.35 |
five.forty four |
6.53 |
seven.83 |
seven.87 |
9.eighty three |
11.eight |
14. to |
19.7 |
20. |
twenty. |
20. |
twenty. |
20. |
20. |
20. |
|
|
Z5BLD60-()GU |
2000RPM |
3.14 |
3.seventy six |
four.eighteen |
five.23 |
6.27 |
7.52 |
eight.36 |
ti,5 |
12.fem |
thirteen.six |
18.nine |
20. |
twenty. |
20. |
twenty. |
20. |
twenty. |
20. |
|
2500RPM |
two.50 |
3.01 |
3.35 |
four.18 |
five.02 |
six.02 |
six.sixty nine |
8.37 |
10. |
ten.nine |
15.one |
eighteen.2 |
20. |
twenty. |
twenty. |
20. |
20. |
twenty. |
Be aware :The (gray) in the table implies that the rotation direction is regular with the motor.(The torque unEPTdifferent velocity and pace ratio is acquired unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
Organisationsoplysninger
Ofte stillede spørgsmål
Q: What’re your principal goods?
A: We at present produce Brushed Dc EPTs, Brushed Dc Gear EPTs, Planetary Dc Gear EPTs, Brushless Dc EPTs, Stepper motors, Ac EPTs and Large EPT Planetary Gear Box and so on. You can examine the specs for earlier mentioned motors on our site and you can e mail us to recommend required motors for every your specification also.
Q: How to pick a appropriate motor?
A:If you have motor pictures or drawings to demonstrate us, or you have comprehensive specs like voltage, pace, torque, motor dimension, functioning mode of the motor, needed life time and sounds level and many others, make sure you do not hesitate to allow us know, then we can recommend suited motor for each your ask for accordingly.
Q: Do you have a personalized service for your stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd motors?
A: Sure, we can customize for each your ask for for the voltage, pace, torque and shaft dimensions/condition. If you want added wires/cables soldered on the terminal or need to have to insert connectors, or capacitors or EMC we can make it way too.
Q: Do you have an individual layout service for motors?
A: Yes, we would like to style motors independently for our customers, but it might need some mould deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ing EPT and design and style charge.
Q: Hvad er din leveringstid?
A: EPTly sEPTing, our standard stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd merchandise will need fifteen-30days, a bit EPTer for tailored goods. But we are very fleXiHu (West Lake) Dis.ble on the lead time, it will count on the specific orders.
Remember to speak to us if you have comprehensive requests, thank you
