Produktbeskrivelse

Starshine Generer cykloid gearmotor Karakteristika

en. Attributter:
1. Smooth running,low noise gear tooth needle far more engagement.
two. Cycloidal tooth profile gives a large get in touch with ratio to endure overload shocks
3. Compact dimension: one ratio available from 1/9 to 1/87, double stage up from 1/ninety nine to 1/7569 
four. Excellent for dynamic applications: recurrent commence-stop-reversing duties satisfies for cyclo speed reducer because inertia is lower
five. Decrease routine maintenance charges: large trustworthiness, lengthy life, nominal maintenance when compared to traditional gearboxes
six. Internal parts replaceable with other brands to make sure working.

7. Fedtsmurte og oliesmurte modeller tilgængelige
8. Udgangsakselrotationsforløb: Enkeltgående reduktion: Rotation med uret Dobbelt reduktion → Rotation mod uret
9. Ambient Circumstances: Indoor Set up:ten-40 Celsius, Max eighty five% Humidity, Beneath 1000m Altitude, Nicely Ventilated Setting, Free of corrosive,        explosive gases, vapors and dust
ten.Slow Speed Shaft Course: Horizontal, Vertical Up & Down, Common Route
elleve. Monteringstype: Fodmontering, flangemontering og lodret F-flangemontering,
tolv. Indgangsforbindelse: Cyclo Integral Motor, Hul Enter-akseladapter
13. Coupling Approach With Pushed Device: Coupling, Gears, Chain Sprocket Or Belt
14. Cykloidreduktionskapacitet, sortiment: 0,37 kW ~ 11 kW

2. Specialiseret parameters

Om os

ZheJiang CZPT Co.,Ltd,the predecessor was a state-owned military CZPT organization, was proven in 1965. CZPT specializes in the full electricity transmission remedy for substantial-finish tools manufacturing industries primarily based on the intention of “Platform Item, Software Design and Expert Service”.
Starshine have a sturdy complex power with above 350 workers at current, including above thirty engineering specialists, 30 quality inspectors, covering an area of 80000 square meters and varieties of sophisticated processing equipment and screening equipments. We have a excellent foundation for the industry application improvement and service of higher-end velocity reducers & variators proudly owning to the provincial engineering technology study center,the lab of equipment velocity reducers, and the foundation of modern day R&D.

Vores team

Kvalitetshåndtag
Høj kvalitet: Insister på forbedring, stræb efter ekspertise. Med udviklingen af ​​udstyrsindustrien er kunden aldrig tilfreds med den nuværende kvalitet af vores produkter, tværtimod skaber vi værdien af ​​kvalitet.
Kvalitetspolitik: at forbedre det samlede niveau inden for kraftoverførsel  
Kvalitetssyn: Kontinuerlig forbedring, stræben efter ekspertise
Kvalitetsfilosofi: Kvalitet skaber værdi

tre. Indgående kvalitetskontrol
At fastlægge et acceptabelt AQL-niveau for kontrol af indgående materialer, at sørge for materialer til hele inspektionen, prøveudtagningen og immuniteten. Ved modtagelse af kvalificerede produkter til lager, returvarer af underlødig kvalitet, kontrol, omarbejdning og omarbejdningsinspektion, ansvarlig for sporing af fejl, at overvåge leverandøren for at træffe korrigerende foranstaltninger. 
foranstaltninger til at forhindre gentagelse.

4. Proceskvalitetskontrol
Produktionsstedet for den første undersøgelse, inspektion og endelig inspektion, prøveudtagning i henhold til kravene i nogle projekter, vurdering af kvalitetsændringstendensen
 fundet unormale fænomener i fremstillingen og overvåge produktionsafdelingen for at forbedre og eliminere det unormale fænomen eller den unormale tilstand.

fem. FQC (Endelig QC)
Når produktionsafdelingen har færdiggjort produktet, skal de træde i kundens sted ved kvalitetsverifikationen af ​​det færdige produkt for at sikre kvaliteten af 
kundernes forventninger og behov.

seks. OQC (Udgående QC)
Efter inspektion af produktprøven er det muligt at bestemme den kvalificerede vare, hvilket tillader opbevaring. Men når det færdige produkt er fra lageret, foretages der en kontrol, der kaldes forsendelsesinspektion, inden varerne formelt leveres. Kontrol af indhold: Bekræft status for opbevaring og overførsel på lageret, og bekræft leveringen. 
Produktet er en produktinspektion for at bestemme de kvalificerede produkter.

syv. Certificering.

Pakning

Forsendelse

###

###

###

###

###

###

How to Use a Cyclone Gearbox

Often, a cycloidal gearbox is used in order to achieve a torque transfer from a motor or pump. This type of gearbox is often a common choice as it has a number of advantages over a regular gearbox. Its main advantage is that it is easy to make, which means that it can be incorporated into a variety of applications. However, if you want to use a cycloidal gearbox, there are a few things that you need to know. These include the operation principle, the structure and the dynamic and inertial effects that come with it.

Dynamiske og inertielle effekter

Several studies have been carried out on the static and dynamic properties of cycloidal gears. The study of these effects is beneficial in assisting optimal design of cycloidal speed reducers.
In this paper, the dynamic and inertial effects of a two-stage cycloidal speed reducer have been investigated using the CZPT program package. Moreover, a new model for cycloidal reducers based on non-linear contact dynamics has been developed. The new model aims to predict several operational conditions.
The normal excitation contact force for the cycloid discs of the first and second stage is very similar. However, the total deformation at the contact point is different. This effect is mainly due to the system’s own oscillations. The cycloid discs of the second stage turn around the ring gear roller with a 180deg angle. This angle is a significant contributor to the torque loads. The total excitation force on the cycloid discs of first and second stage is 1848 N and 2068.7 N, respectively.
In order to analyze the contact stress, different gear profiles were investigated. The mesh density was considered as an important design criterion. It was found that a bigger hole reduces the material content of the cycloidal disc and results in more stresses.
Moreover, it is possible to reduce the contact forces in a more efficient manner by changing the geometric parameters. This can be done by mesh refinement along the disc width. The cycloidal disc has the greatest influence on the output results.
The efficiency of a cycloidal drive increases with the increase in load. The efficiency of a cycloidal reducer also depends on the eccentricity of the input shaft and the cycloidal plate. The efficiency curve for small loads is linear. However, for the larger loads, the efficiency curve becomes more non-linear. This is because the stiffness of the cycloid reducer increases as the load increases.

Struktur

Despite the fact that it looks like a complicated engineering puzzle, the construction of a cycloidal gearbox is actually quite simple. The key elements are the base, the load plate and the thrust bearing. All these elements work together to create a stable, compact gearbox.
The base is a circular section with several cylindrical pins around its outer edge. The pins are fixed on a fixed ring that holds them in a circular path. The ring serves as a reference circle. The circle’s size is approximately 5mm in diameter.
The load plate is a series of threaded screw holes. These are arranged 15mm away from the center. These are used to anchor external structures. The load plate must be rotated around the X and Y axis.
The thrust bearing is placed on top of the load plate. The bearing is made of an internal diameter of 35mm and an external diameter of 52mm. It is used to allow rotation around the Z axis.
The cycloidal disc is the centerpiece of the cycloidal gearbox. The disc has holes for the pins that drive the output shaft. The holes are larger than those used in output roller pins. The disc also has a reduced eccentricity.
The pins are attached to the cycloidal disc by rolling pins. The pins are made of a material that provides mechanical support for the drive during high-torque situations. The pins have a 9mm external diameter. The disc has a number of lobes and is rotated by one lobe per shaft revolution.
The cycloidal gearbox also has a top cover that helps keep the components together. The cover has a pocket for tools. The top cover also has threads that screw into the casing.

Operation principle

Among many types of gear transmissions, cycloidal gearboxes are used in heavy machinery and multi-axis robots. They are highly effective, compact and capable of high ratios. In addition, they have an overload capability.
Cycloid disks are driven by eccentric shafts that rotate around fixed ring pins. Roller pins of the pin disc engage with holes in the cycloidal disc. These roller pins drive the pin disc and the pin disc transfers the motion to the output shaft.
Unlike conventional gear drives, cycloidal drives have low backlash and high torsional stiffness. They are ideally suited to heavy loads and all drive technologies. The lower mass and compact design of the cycloidal disk also contributes to its high efficiency and positioning accuracy.
The cycloidal disc plays a central role in the gearbox kinematics. It rotates around a fixed ring in a circle. When the disc is pushed against the ring gear, the pins engage with the disc and the roller pins rotate around the pins. This rotating motion generates vibration, which travels through the driven shafts.
Cycloid discs are typically designed with a short cycloid, so that the eccentricity is minimized. This reduces unbalance forces at high speeds. Ideally, the number of lobes on the cycloid is smaller than the number of surrounding pins. This reduces the amount of Hertzian contact stress.
Unlike planetary gears, cycloidal gears have high accuracy and are capable of withstanding shock loads. They also experience low friction and less wear on tooth flanks. They also have higher efficiency and load capacity.
Cycloid gears are generally more difficult to manufacture than involute gears. Cycloid gears are not suitable for stacking gear stages. They require extreme accuracy for manufacturing. However, their smaller size and low backlash, high torsional stiffness, and low vibration make them ideal for use in heavy machines.

Evolvent tandprofil

Almost all gears are manufactured with an involute gear tooth profile. Cycloid gears are also produced with this profile. Compared with involute gears, cycloid gears are stronger and can transmit more power. However, they can also be more difficult to manufacture. This makes them costlier.
The involute gear tooth profile is a smooth curve. It is derived from the involute curve of a circle. A tangent to the base circle is the normal at any point of an involute.
This curve has properties that allow the involute gear teeth to transfer motion in perpendicular direction. It is also the path traced by the end of the string unwrapping from a cylinder.
An involute profile has the advantage of being easy to manufacture. It also allows for smooth meshing despite misalignment of the centre distance. This profile is also preferred over a cycloid tooth profile, but it is not the best in every regard.
Cycloid gear teeth are also made of two curves. Unlike involute teeth, cycloid gear teeth have a consistent radius. Cycloid gears are less likely to produce noise. But they are also more expensive to manufacture.
Involute teeth are easier to manufacture because they have only one curve. Cycloid gears can also be made with a rack type cutter. This makes them cheaper to manufacture. However, they require an expert design. They can also be manufactured with a gear shaper that includes a pinion cutter.
The tooth profiles that satisfy the law of gear-tooth action are sometimes called conjugate profiles. The involute profile is the most common of these. It allows for constant torque transmission.

Modreaktion

Typically, cycloidal drives provide a high ratio of transmission with no backlash. This is because the cycloid disc is driven by an eccentric shaft. During rotation, the cycloid disc rotates around a fixed ring. This ring also rotates independently of the center of gravity.
The cycloid disc is typically shortened to reduce the eccentricity. This helps to minimize the unbalance forces that may occur at high speeds. The cycloid also offers a larger gear ratio than traditional gears. This provides a better positional accuracy.
Cycloid drives also have a high torsional stiffness. This provides greater torsional resilience and shock load capabilities. This is important for a number of reasons, such as in heavy-duty applications.
Cycloid drives also have lower mass. These benefits make them ideally suited for all drive technologies. The design also allows for higher torsional stiffness and service life. These drives also have a much smaller profile.
Cycloid drives are also used to reduce speed. Because of the high torsional stiffness of the cycloid, they also have high positioning accuracy.
Cycloid drives are well-suited to a variety of applications, including electric motors, generators, and pump motors. They are also highly resistant to shock loads, which is important in a variety of applications. This design is ideal for applications that require a large transmission ratio in a compact design.
Cycloid drives also have the advantage of minimizing the clearance between the mating components. This helps to eliminate interference and ensure a positive fit. This is particularly important in gearboxes. It also allows for the use of a load cell and potentiometer to determine the backlash of the gearbox.

editor by czh 2022-12-13